First off; I’m an old guy that isn’t all that bright. So, I have a 2014 RAM R/T with a new cam, MDS delete & other mods that is just sitting in the garage and I can’t even drive it since I don’t have a tune for it. It’s a daily driver (did I mention I’m not that bright? ….. LOL).
So, I purchased a remote tune for my HPtuner & didn’t hear from the guy for three weeks (so that didn’t work out).
So, I purchased a remote tune from another fine fellow & he sent me four tunes to try. They didn’t get me out of the garage. Data Logs sent to him a week ago with not even a hint of a response or status of when to expect a new revision.
Seems like most of the tuner guys/gals are overloaded; cutting back; do it part time; doing mostly GM/Ford………. Or won’t touch it because I didn’t buy their cam, etc. (this has been a learning process for me).
This is a solicitation for anyone on the forum who has the time to write a custom tune for me & the time to follow up with revisions.
· It doesn’t have to be a tune for the HPtuner
· I’m open to using whatever a tuner thinks will get the job done.
· I listed most of my mods & other data below to see if anyone wants to tackle this……..
2014 RAM 1500 Sport R/T, standard cab, 6'4" bed
· VIN: Data on file
· PCM Data: Data on file
o Module P/N: Data on file
o Module VIN: Data on file
o Authorized Software Update: Data on file
· 5.7 L V8
· 8 speed transmission
· 3.92:1, limited slip
· 285/45R22 tires (tire diameter 32.1”) on 22”x9” Rims
· Milage: 67,674
Ø daily driver / spirited driving
Current Configuration …… as of 3/27/2021
· Hptuner MPVI2 – VCM Scanner/Editor Version 4.9.771 (Beta), 6 credits
o S/N: Data on file
o Verification Code: Data on file
o tune installed (initial tune – waiting on revision)
§ Won’t idle; think it’s running rich; have not driven truck
· Texas Speed & Performance Cam
o Camshaft Part: 25-TSPCustomCam-HEMI
Intake Exhaust
Duration .050 216 225
Lobe Lift 0.353 0.353
Valve Lift @ 1.65 0.582 0.582
Lobe Separation 112
Intake Center Line 109
· Cam Phaser Limiter
· MDS Delete
· 93 octane gas (10% ethanol)
· ARH Long Tube Headers (1 ¾”), 3” Y-Pipe, (without CATs)
· Borla Grand Touring exhaust system with 5” tips
· 4 each factory O2 sensors installed
· 87mm Ported Throttle Body
· Vararam Grabber cold air intake
· 180-degree thermostat
· Electric fan – RAM V6
· Clutch Fan Delete
· AEM X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0334)
o Wideband Sensor is installed aft of Y-Pipe
NOT INSTALL YET: Transmission Cooler Thermostat Bypass - Revmax
WHEW.......sorry to be so long-winded or a pain in everyone's **** ........
So, I purchased a remote tune for my HPtuner & didn’t hear from the guy for three weeks (so that didn’t work out).
So, I purchased a remote tune from another fine fellow & he sent me four tunes to try. They didn’t get me out of the garage. Data Logs sent to him a week ago with not even a hint of a response or status of when to expect a new revision.
Seems like most of the tuner guys/gals are overloaded; cutting back; do it part time; doing mostly GM/Ford………. Or won’t touch it because I didn’t buy their cam, etc. (this has been a learning process for me).
This is a solicitation for anyone on the forum who has the time to write a custom tune for me & the time to follow up with revisions.
· It doesn’t have to be a tune for the HPtuner
· I’m open to using whatever a tuner thinks will get the job done.
· I listed most of my mods & other data below to see if anyone wants to tackle this……..
2014 RAM 1500 Sport R/T, standard cab, 6'4" bed
· VIN: Data on file
· PCM Data: Data on file
o Module P/N: Data on file
o Module VIN: Data on file
o Authorized Software Update: Data on file
· 5.7 L V8
· 8 speed transmission
· 3.92:1, limited slip
· 285/45R22 tires (tire diameter 32.1”) on 22”x9” Rims
· Milage: 67,674
Ø daily driver / spirited driving
Current Configuration …… as of 3/27/2021
· Hptuner MPVI2 – VCM Scanner/Editor Version 4.9.771 (Beta), 6 credits
o S/N: Data on file
o Verification Code: Data on file
o tune installed (initial tune – waiting on revision)
§ Won’t idle; think it’s running rich; have not driven truck
· Texas Speed & Performance Cam
o Camshaft Part: 25-TSPCustomCam-HEMI
Intake Exhaust
Duration .050 216 225
Lobe Lift 0.353 0.353
Valve Lift @ 1.65 0.582 0.582
Lobe Separation 112
Intake Center Line 109
· Cam Phaser Limiter
· MDS Delete
· 93 octane gas (10% ethanol)
· ARH Long Tube Headers (1 ¾”), 3” Y-Pipe, (without CATs)
· Borla Grand Touring exhaust system with 5” tips
· 4 each factory O2 sensors installed
· 87mm Ported Throttle Body
· Vararam Grabber cold air intake
· 180-degree thermostat
· Electric fan – RAM V6
· Clutch Fan Delete
· AEM X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0334)
o Wideband Sensor is installed aft of Y-Pipe
NOT INSTALL YET: Transmission Cooler Thermostat Bypass - Revmax
WHEW.......sorry to be so long-winded or a pain in everyone's **** ........