2018 RAM uConnect Upgrade Help

[MidnightLightz]

Good Evening,

I bought a UAS 8.4" uConnect (Hardware # CVRC27N0GL & PN # 68331635AA) online. I'm trying to update the software to the latest firmware through uConnect but I do not have the original VIN of the vehicle the donor came from (was from a 2018 Dodge Ram).

I was wondering if anyone who had the same hardware and PN#s could send me their VIN so I can get the correct firmware from uConnect or if someone could point me in the right direction of somewhere I could get the latest/best firmware for this uConnect.

THANK YOU IN ADVANCE!!!

 

[SitKneelBend]

Good Evening,

I bought a UAS 8.4" uConnect (Hardware # CVRC27N0GL & PN # 68331635AA) online. I'm trying to update the software to the latest firmware through uConnect but I do not have the original VIN of the vehicle the donor came from (was from a 2018 Dodge Ram).

I was wondering if anyone who had the same hardware and PN#s could send me their VIN so I can get the correct firmware from uConnect or if someone could point me in the right direction of somewhere I could get the latest/best firmware for this uConnect.

THANK YOU IN ADVANCE!!!

Even if you put in a valid VIN the site will report your vehicle is up to date. This thread will have the firmware you're looking for...

INFO - 2013-2018 8.4A /AN FW Notes (RA3/VP3-NA & RA4/VP4-NA & UAx)

DISCLAIMER: I am not a coder, developer, software guru, electrical engineer, etc. but I did sleep at a Holiday Inn Express once! Since some have had issues with the 4th Gen 8.4 conversion I am looking to gather some details into one thread. I will update as new information is found and posted...

www.ramforum.com