Additional UAQ/UAS Update Files 28.3/30.24/34.2

[evghdr]

good afternoon, I have a JEEP COMPASS MP 2017 car. It has uconnect panasonic installed. software version USA-MY17.5_GR18.7.0-20170706-G071.
I am interested in updating to the European version. to receive Russian language and even radio waves.
do you have any solution?
thank you.

 

[Mpgrimm2]

good afternoon, I have a JEEP COMPASS MP 2017 car. It has uconnect panasonic installed. software version USA-MY17.5_GR18.7.0-20170706-G071.
I am interested in updating to the European version. to receive Russian language and even radio waves.
do you have any solution?
thank you.

Reach out to Customtronix in Holland

 

[Orang3Beard]

Hello world - after attempting to digest this megathread I have kinda confused myself on what radio I have and what steps I should take.

I have a 2019 5th gen Bighorn with 8.4" Uconnect 4 w/o nav (UAS?)
I've been experiencing more and more AndroidAuto issues (drops, handshake failures, freezes, black screens) since updating my Pixel 9 Pro (Android 16)

Any help is greatly appreciated in decoding what I'm currently running and what I should download and perform flash(es)

 

[Mpgrimm2]

None of the info/files in this thread apply to the 5th Gen trucks/radios.

 

[torquen]

Thanks for the Links SnK. (I need to update Mom's UAQ with missing map database files and hopefully get the nav to work again when it updates from v22.60 to v40.1)


>> Looks like the updated TSB says that if you are between v19.1 and 22.60 (less than v22.64) = update to v28.3 first, then you can go to v40.1 safely

--------------------------

2. What is the current radio software level (Application Version)?

• 40.1 or higher >>> The radio software is already up to date. Normal diagnostics should be performed.

• At or above 22.64 and under 40.1 >>> The radio will only need one USB update. Proceed to Step 1 of the Repair Procedure.

• At or above 19.9 and under 22.64 >>> The radio will need two USB updates. Proceed to Step 1 of
the Repair Procedure.

CAUTION! If this software is used on a radio with software level under 19.9, it could damage the radio. If the radio is damaged it may need to be replaced. Updating the radio directly from software level IR19.9 to QR40.1
will cause the radio to be damaged and it will need to be replaced. Always remember to properly perform the two step update if required. Start the two step update using 28.3 software.

--------------------------



and From post 1...

I followed some links to this thread from another forum. I was able to update my 2018 ram 2500 to the 22.6 using your files. I clicked on your link to this thread. Ive tried to update to 28.3 and 34.2 so I can then do the 40.1. I can't get the 28.3 or 34.2 to load into my truck. It says software not compatible with vehicle. Do you happen to have the links for the files I need? I'm at 22.6 now and would like to work up to the latest. I did read where I need to do the updates in steps. I also do not have the nav package if that makes a difference. I just use my iPhone and the CarPlay.

 

[SitKneelBend]

I followed some links to this thread from another forum. I was able to update my 2018 ram 2500 to the 22.6 using your files. I clicked on your link to this thread. Ive tried to update to 28.3 and 34.2 so I can then do the 40.1. I can't get the 28.3 or 34.2 to load into my truck. It says software not compatible with vehicle. Do you happen to have the links for the files I need? I'm at 22.6 now and would like to work up to the latest. I did read where I need to do the updates in steps. I also do not have the nav package if that makes a difference. I just use my iPhone and the CarPlay.

What files did you use for all updates?

 

[Mpgrimm2]

I followed some links to this thread from another forum. I was able to update my 2018 ram 2500 to the 22.6 using your files. I clicked on your link to this thread. Ive tried to update to 28.3 and 34.2 so I can then do the 40.1. I can't get the 28.3 or 34.2 to load into my truck. It says software not compatible with vehicle. Do you happen to have the links for the files I need? I'm at 22.6 now and would like to work up to the latest. I did read where I need to do the updates in steps. I also do not have the nav package if that makes a difference. I just use my iPhone and the CarPlay.

What is the Mopar PN of the radio?
ie 6833163xAx

What is the Internal hardware number of the radio from the dealer menu?
ie CN-SCXXXX

What does the dealer menu say your current Application Version is?

What file name/link did you try to use?

Reference: Post # 3881 - Good Info on 4th Gen Ram Panasonic 4c Internal Hardware PNs vs Mopar PNs

 

[torquen]

What files did you use for all updates?

I believe they were yours and were in a google doc. It’s in post 215 of this thread where the links were posted. I also could not get the 40. One to open as it says 404 not found.

 

[torquen]

What is the Mopar PN of the radio?
ie 6833163xAx

What is the Internal hardware number of the radio from the dealer menu?
ie CN-SCXXXX

What does the dealer menu say your current Application Version is?

What file name/link did you try to use?

Reference: Post # 3881 - Good Info on 4th Gen Ram Panasonic 4c Internal Hardware PNs vs Mopar PNs

I’ll try to find this info for you.

 

[torquen]

What is the Mopar PN of the radio?
ie 6833163xAx

What is the Internal hardware number of the radio from the dealer menu?
ie CN-SCXXXX

What does the dealer menu say your current Application Version is?

What file name/link did you try to use?

Reference: Post # 3881 - Good Info on 4th Gen Ram Panasonic 4c Internal Hardware PNs vs Mopar PNs

Where do I find this information?

 

[Mpgrimm2]

Also see post 2