Jimmy07
Senior Member
- Joined
- Feb 23, 2017
- Posts
- 3,254
- Reaction score
- 2,915
- Ram Year
- 2017
- Engine
- 6.4 Hemi
Windows or android version?Can you be more specific on where to do this in Alfa?, newbie to AlfaOBD
What engine?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Windows or android version?Can you be more specific on where to do this in Alfa?, newbie to AlfaOBD
Connect to the engine module, then click on the battery icon in the lower right, the click read system status.
Yours would be chrysler powertech/pentastar/world/hemi v6v8Tried that, it asks me to "Select Control Unit" (see pic). The RAM is a 2014 HEMI so I tried a few of these as Control Units but none connect to the CANBUS (?), thoughts? Alfa is connected otherwise. Is there a newer version that has some additional options? I did a screenshot when I brought my phone inside which is why it says interface not connected, I verified it was connected when I was physically trying to read the information. Is there an alternate location that provides the same info?
View attachment 469097
Got it to go finally, do you think it's safe to use the highest value to set the mileage on the odometer as true? I'm guessing it still won't be exact and there may be a very minimal discrepancy. Do we need to worry about Idle and Driving numbers? Are the actual numbers available someplace so I can get those proper as well?Yours would be chrysler powertech/pentastar/world/hemi v6v8