Another hid kit question for 15+ projector guys

[grozier]

I've been looking for a HID kit, thought I had my mind made up with the retroshop kit. But I've also was looking at the DSK kit, Dynamic Diodes hid kit and the enlight kit as well. I'd prefer a 50 or 55w kit. Trying not to break the bank because I want led fog lights to match

2015 ram sport 4x4

 

[RedRam20s]

Its only 35w, but I bought these. They're great so far.

DDM Tuning: HID and LED Lighting

 

[Avgas]

Its only 35w, but I bought these. They're great so far.

DDM Tuning: HID and LED Lighting

Same here

Sent from my HTC One_M8 using Tapatalk

 

[firemedic10584]

I'm running Canbus Ballasts off Ebay. Had them for well over a year in my stock projectors with no issues. Paid maybe 40$ for the ballasts and bulbs. I know a lot of folks on here say you have to buy the expensive kits or you'll get what you pay for, but I disagree. I've had zero issues with my 40$ kit and they're plenty bright!

 

[ohengineering]

Enlight all of the way. My truck was the first to go under the knife with that kit, and it's going flawlessly. Running the 55W kit.

 

[schul788]

Enlight is nice because he has a nice aluminum bracket for the resistors and shows exactly where to mount them. I got the 35W 5000K Morimoto kit from retroshop and am happy with it though and it's very similar to enlight. Mounting the resistors can be a pain but everything else was easy. If you really don't "need" the 55W though I would stick with 35W. It'll last longer and is still WAY brighter than stock. I used the Morimoto XB LEDs for my fogs. Just make sure you get the Canbus anti flicker module from either Morimoto or Diode for the LED fogs or you'll get the headlight out warnings. The lights match perfectly. You'd be happy with either.

 

[KCaudill]

Enlight is nice because he has a nice aluminum bracket for the resistors and shows exactly where to mount them. I got the 35W 5000K Morimoto kit from retroshop and am happy with it though and it's very similar to enlight. Mounting the resistors can be a pain but everything else was easy. If you really don't "need" the 55W though I would stick with 35W. It'll last longer and is still WAY brighter than stock. I used the Morimoto XB LEDs for my fogs. Just make sure you get the Canbus anti flicker module from either Morimoto or Diode for the LED fogs or you'll get the headlight out warnings. The lights match perfectly. You'd be happy with either.

Do you have a link of what and where you bought these?

 

[schul788]

Do you have a link of what and where you bought these?

If you're talking the LED fogs: https://www.theretrofitsource.com/led-lighting/morimoto-xb-led-headlight-bulbs.html#.VxDdidQrJaQ
If you're talking canbus I got the morimoto: https://www.theretrofitsource.com/c...ndalone-canbus-wire-harness.html#.VxDjnNQrJaQ