Anyone try Modifystreet headlights?

[Jimmy07]

Here’s some photos with HIDs. I ended up getting this Innovited kit off amazon- https://www.amazon.com/Innovited-Xe...h7&qid=1553865879&s=gateway&sr=8-9&th=1&psc=1

It was easier just getting this kit, otherwise I would have had to get 9012 to h7 harness adapters for my other ballasts. These are 35w and 5000k. I don’t have any long straight dark stretches of road around me, but these will give you a good idea. The step downs are perfectly centered perpendicular to the truck, and the width is good from center to center. The passenger headlight seems to trail off a little bit downhill from left to right.

 

[chrisbh17]

Just got a call from Alpharex/Modifystreet yesterday asking about my bulb out warning.

They are working on becoming vendors here.

They offered to send out load resistors so I could put them in and see if it helps.

FYI, they are the same company.

I am liking their Nova series too, just a little rich for my blood is all.

Sent from my SM-G892A using Tapatalk

Hmm...maybe an introductory sale is coming?

They really do look pretty good for the price. Still hemming and hawing over ordering a set (I have enough projects that need to be done on the truck), but I bet by the end of this weekend I will give in.

 

[rotwiler]

Just got a call from Alpharex/Modifystreet yesterday asking about my bulb out warning.

They are working on becoming vendors here.

They offered to send out load resistors so I could put them in and see if it helps.

FYI, they are the same company.

I am liking their Nova series too, just a little rich for my blood is all.

Sent from my SM-G892A using Tapatalk

Might need to ask them for resistor, I have same issue in my 2013. It's really minor, doesn't pop up driving, but rather not have it.

 

[rotwiler]

Here’s some photos with HIDs. I ended up getting this Innovited kit off amazon- https://www.amazon.com/Innovited-Xenon-Lights-Colors-Ballast/dp/B07NCQFKQ8/ref=mp_s_a_1_9?keywords=innovited+h7&qid=1553865879&s=gateway&sr=8-9&th=1&psc=1

It was easier just getting this kit, otherwise I would have had to get 9012 to h7 harness adapters for my other ballasts. These are 35w and 5000k. I don’t have any long straight dark stretches of road around me, but these will give you a good idea. The step downs are perfectly centered perpendicular to the truck, and the width is good from center to center. The passenger headlight seems to trail off a little bit downhill from left to right.

Did they fit under cap without cutting? I want to do hid, but I don't want to hack up the caps.

 

[Jimmy07]

Did they fit under cap without cutting? I want to do hid, but I don't want to hack up the caps.

Had to drill the hole for the wire grommet. There’s absolutely no way to stuff any brand’s ballast and wiring all into that hole.

 

[rotwiler]

Thanks, ya, I have had worst luck on oem and 2 different aftermarket black lights, all got major condensation. The OEM lights had 2 inches of water, looked like fish tank. Honestly this is the only set of lights that when I went though a auto car wash I got zero condensation. So a little paranoid messing with them.

 

[Jimmy07]

Jimmy07 - Can you send a finished picture of this harness? I would love to copy this but wanted to see it before ordering everything. Thank you

For those interested in these that have factory projectors (@tator2k), I just got off the phone with a guy from alpharex, and they now have conversion harnesses made up. I would say just call them when you order or let them know you need the harnesses. Here’s what they have-

I made a suggestion that they add the DRL wire for those that want to enable the dedicated DRL circuit with alfaobd.

 

[Murphyjs6]

I love mine I put in the Hikari LEDs in 12000lm output is outstanding But I might open them up and ad white LEDs to the bottom and wire them in to the DRL and then add amber to the top And wire them to the Blinker. i feel like the bottom is just to much empty space barely getting any use...

 

[Graygoose]

Great looking, and I was considering OEM black quads again....hmmmm

 

[Murphyjs6]

Great looking, and I was considering OEM black quads again....hmmmm

After I put the LEDs in these are miles better than the OEM quads I'm going to smoke the blinker and paint the chrome on these when I open them. And keep the main "glass" clear.

Sent from my SM-N960U using Tapatalk

 

[G. Mcpherson]

View attachment 160880 View attachment 160881 View attachment 160882



I love mine I put in the Hikari LEDs in 12000lm output is outstanding But I might open them up and ad white LEDs to the bottom and wire them in to the DRL and then add amber to the top And wire them to the Blinker. i feel like the bottom is just to much empty space barely getting any use...

You used the Hikari in the Low beam?

 

[Murphyjs6]

You used the Hikari in the Low beam?

In both low and high.

I have a video but it won't let me post it.

 

[1500ram12]

In both low and high.

Sent from my SM-N960U using Tapatalk

Any output shots


Sent from my iPhone using Tapatalk Pro

 

[Murphyjs6]

Any output shots


Sent from my iPhone using Tapatalk Pro

No I only have the video and it won't let me post it.

Sent from my SM-N960U using Tapatalk

 

[1500ram12]

No I only have the video and it won't let me post it.

Sent from my SM-N960U using Tapatalk

You'll have to upload it to YouTube then copy the link


Sent from my iPhone using Tapatalk Pro

 

[Murphyjs6]

You'll have to upload it to YouTube then copy the link


Sent from my iPhone using Tapatalk Pro

Ohhh that sounds like work I don't want to do hahaha I will get pictures of it tonight

Sent from my SM-N960U using Tapatalk

 

[1500ram12]

Ohhh that sounds like work I don't want to do hahaha I will get pictures of it tonight

Sent from my SM-N960U using Tapatalk

Haha it's not that hard but pics work also


Sent from my iPhone using Tapatalk Pro

 

[G. Mcpherson]

Those look like they would be good. Any blinding of others at night? Look forward to the Pic's.

 

[Murphyjs6]

Those look like they would be good. Any blinding of others at night?

Not when they are adjusted property

Sent from my SM-N960U using Tapatalk

 

[rotwiler]

I am wanting to see them with led in low beam and light pattern.