Harness

[rthomasjr]

I took my 2013 5.7 Hemi into the shop and when I got it back I noticed this harness was not plugged in. I have no clue where to plug it into. Any assistance would be appreciated!

 

[Socalramfan]

Do you Aux / Fog lights?

If so, check their operating correctly.

 

[rthomasjr]

The fogs works correctly. Only thing that isn’t working that was working was puddle lights and turn signals.

 

[Socalramfan]

Just went out to mine to see if I could locate what your showing….. but could not.

obviously there’s another end (male) which is exposed, and has to be within the length of the wiring shown (@ 6” im guessing).

Time to just get out a bright flashlight and really look closely within that area.

Meant to ask previously, but what exactly was the shop doing to your Ram?

Might need to remove your headlight assembly, which is easy, to ensure that the turn signal plug is attached

 

[rthomasjr]

Trying to chase down a interior light issue and replacing a resistor for a blower motor because the blower stopped.

 

[RamInfo]

Take it back to the shop and have them finish the job. The tech there unplugged it and should know where it goes.

best,
DG

 

[rthomasjr]

Yeah, I have to wait until Tuesday when they open back up.