HID Install...

[relliK]

Which plug from the truck driver side is used for the OEM input on the new harness? Neither the headlight or running light harness fit.

 

[Hemi450hp]

Which kit did you buy? It should just plug directly into the plug where the factory bulb is connected.

 

[relliK]

I purchased Head and Fog custom kit from Retro. The Fog light input plugs in but the Heads does not.

 

[Hemi450hp]

The wiring harness should be labeled. It should plug into the harness where your current headlight bulb is plugged in. Its been a while since I messed with mine, but that is how every kit has been that I have installed.

 

[relliK]

The wiring harness should be labeled. It should plug into the harness where your current headlight bulb is plugged in. Its been a while since I messed with mine, but that is how every kit has been that I have installed.

Thank you, Jeremy helped lay it out for me!!

 

[0212353]

Yeah, its goofy.........

The harness is labelled "OEM input", but....on the quad lights - the OEM input goes where it should, on the OEM input. LOL - the harness goes to the HID wiring next to the bulb wiring.

But, got ya cared for a few hours ago.

 

[sullivan]

what kind of relays run on the retroshop harnesses.

 

[0212353]

Its a dual relay setup, looks like this:

 

[sullivan]

Very nice looks similar to what I made the other day. Did you have to put a diode between the high and low wires on the relay? I like the clear relays!

 

[0212353]

that is the single beam setup, no diode needed.

The bixenon ones we do use a control box rather than the relays. (for now!)

 

[tjones524]

Nice harness, can u get a picture of the Dual harness? The bi-xenon one.

Thanks. I'm wanting to do the heads/fogs here soon.

Does your fog kit come with a harness as well? Is it needed for that?

I'd probably be wanting to run 55w heads/35w fogs, so 8000k and 6000k should match?

Thanks.

 

[0212353]

Fogs, we do use a harness on as well.

For color, we don't do 8K....period. 6K is the highest we offer.