Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Interested in an answer too. I have a similar issue with an Tesla style radio.I've been using my UAS upgrade for about a month now and am really pleased overall with. 1 issue that has surfaced is that the system doesn't seem to recognize if the headlights are on or not, when I select the "auto" mode to dim the display when the headlights are on there is no change. In manual mode it doesn't cycle between the two settings. it thinks the headlights are on all the time. Has anyone else run into this? Any fix available?
Sent you a message.I would like to purchase a media harness please. Can you message me? I started a conversation but IM not sure if that got to you or not as I am new and not familiar with the way the forum works.
Thanks You
...and then sell your UAS!I have a 18 2500 CTD with a UAS radio, it sounds like I should be able to just plug in a UAQ Nav radio and it’ll work?
That’s what I would do if you want the NAV. However the Nav through your phone will work just as well IMOThat’s the plan if I can make it work!
I just did it. Worked with no issues so long as your UAQ has the security code.I have a 18 2500 CTD with a UAS radio, it sounds like I should be able to just plug in a UAQ Nav radio and it’ll work?
They older USB hub will not work with the 18 radio. You will need one of the 2 USB hubs listed in the OP and likely the 18 Compass hub is your best option as far as fitment. You will also need the UAx USB hub adapter harness that you can get from DeereGuy or myself.I had a little storage compartment and installed an older center console taking out my jump seat. The issue is some of the older consoles did not have a place for the media center so I relocated it to the dash. I am hearing you have to install the new media hub which is physically larger if you upgrade to the Panasonic brand stereo with car play. My current on has nav but no CarPlay which is what I am trying to get. I know their are some pretty smart people on here that could offer ideas short of buying a new truck.
Sent from my iPhone using Tapatalk
I've been using my UAS upgrade for about a month now and am really pleased overall with. 1 issue that has surfaced is that the system doesn't seem to recognize if the headlights are on or not, when I select the "auto" mode to dim the display when the headlights are on there is no change. In manual mode it doesn't cycle between the two settings. it thinks the headlights are on all the time. Has anyone else run into this? Any fix available?