Info on e cut outs

[blackout11]

Looking to get one want a clamp on any one got prices or info on good ones and what size ill need

 

[joeg45]

Idk about clamp on mines a qtp but manual i never close it lol but it was 70 and 25 to weld mine on.


Also its a 3" before the muffler

 

[TheMaddog]

i think a 3"

go to Exhaust Cutout | Exhaust Cutouts

 

[1500ram12]

Raceland has a electric one (jj has it) that can be clamped on. I think it's about $170.

Sent from DROID RAZR MAXX using Tapatalk

 

[Musclemckeester]

Get a Raceland. Had a couple issues with mine and they were quick to send out replacement parts to me.

3" is what you need

 

[4x4Hemi]

Raceland isn't clamp on though, it's weld in

 

[BMRbrnSNRbrd]

You can still clamp it on...just get butt clamps from Summit or Jegs...it allows you to clamp two pieces together without having to flare one or the other. I have a Raceland as well and it's on its second truck.

 

[BMRbrnSNRbrd]

Here is a link to some from Summit...they are much cheaper than when I looked before:

Summit Racing SUM-693300 - Summit Racing® Band Clamps - Overview - SummitRacing.com

 

[0212353]

my raceland is clamped on.

 

[Hemi450hp]

I have used band clamps as well for mounting cutouts. As long as you arent repeatedly removing the clamps and putting them back on, they will seal up tight. The more the put them on and off, they will start to leak over time.

 

[09SMOKINHEMI]

sorry for reviving an old thread..... just didn't want to start a new one..... by welding the raceland cutout, has anyone had issues with leaks? if so, were your issues resolved? i'm looking to get one of these as well