zkahn
Junior Member
- Joined
- Mar 15, 2014
- Posts
- 10
- Reaction score
- 0
- Ram Year
- 2010
- Engine
- 4.7L
2010 SLT Extended cab w/4.7L
Installed led bulbs around the first of the year. I used resistors and have been really happy with them. I've never have had a hyper flash issue.
The other day I pulled into a gas station and parked to run in and grab a snack. As I stopped I noticed my parking lights were on. I have the auto lights so didn't put too much thought into it, until I took my foot off the brakes. Parking lights went out??? Put my foot back on the brake and they came back on??? No other issues with or without lights on. I have not taken everything apart again to revert to see if the issue persists.
Anyone else run into this.
FYI I wired the resistors bridging between pin 1 & 3 on the harness, front and rear and left and right.
This is the schematic for the rear
And the front
Installed led bulbs around the first of the year. I used resistors and have been really happy with them. I've never have had a hyper flash issue.
The other day I pulled into a gas station and parked to run in and grab a snack. As I stopped I noticed my parking lights were on. I have the auto lights so didn't put too much thought into it, until I took my foot off the brakes. Parking lights went out??? Put my foot back on the brake and they came back on??? No other issues with or without lights on. I have not taken everything apart again to revert to see if the issue persists.
Anyone else run into this.
FYI I wired the resistors bridging between pin 1 & 3 on the harness, front and rear and left and right.
This is the schematic for the rear
And the front
