M² Mods Intro & Project List

[bobeast]

I tow a small trailer that is barely visible. Is there a way to be able to turn on my camera while driving to view?
Probably scare people behind me at stoplights when I put it in reverse to check load/trailer.
15 Laramie Crew cab, 6'4" bed.
Thank you

You can plug in a Tazer module. Pressing and holding the mute button will turn on the camera at any speed. That device also has a bunch of other cool features

 

[AndrewM]

Got a backup mirror reroute from Mpgrimm2 earlier this year. I have to say Everything was shipped fast, and install was quick and easy. Quality work and he was helpful though-out the process. Keep up the good work!

 

[emyers6]

I am searching for the 2 pin connector that plugs into the blower motor on the Fan Power Harness. Has anyone found this connector or a pigtail with this same connector?

I purchased the whole harness before I knew I could buy one done cheaper for my 8.4 head unit upgrade. The harness was on the floor and that plug got stepped on or something and the plastic is all cracked to crap. I'm trying to keep this goof up as economical as possible as I've already spent twice as much as I needed to for this harness. I can not find that connector or it's exact terminology/name to order a replacement.

If anyone could point me in the correct direction it would be greatly appreciated.

 

[Mpgrimm2]

---- New orders update 12/11/20 ----

To all,
With 2 weeks to go until Christmas, expected shipping delays, etc ... I'm not going to take any new orders until Jan 1st 2021 so I can clear out/focus on the remaining backlog and have a few days off around the holidays.

I thank everyone for their support this year and wish everyone Merry Xmas and a Happy New Year!
(I'll still be around the forum)

Mike G

M² Mods.

 

[likes2build]

Merry Christmas Mike!

 

[tnctx02]

I'll send you a message to get things started.


M² Mods.

Could you send me some info too on this mod? Got my bumper that has the fog lights, gonna look if the truck has it prewired or not tomorrow.

 

[Mpgrimm2]

- DIY: Add 2013-2018 OEM Foglight Wiring.

M² Mods.

 

[tnctx02]

- DIY: Add 2013-2018 OEM Foglight Wiring.

M² Mods.

Thanks so much!

 

[merl]

Hi everyone!

Deereguy and I decided to start a little side project to help out our fellow members with various wiring harnesses and mods for some of the smaller projects and threads around the 4th Gen section for our 2013-2018 trucks.

Each of us will be focusing on specific projects as listed in the next 4-5 posts.

We are calling our joint venture: M² Mods

For now, contact us via Private Message (pm)/conversation so we can give you our contact info with all the details (click our user profile picture). Thank you in advance.

M² Mods
Mpgrimm2 (Mike G.) & Deereguy (Mike D.)

PLEASE NOTE:
All harnesses are made one at a time (several hrs ea) in order of request. We will not collect anything until your harness is ready to ship (PayPal invoice with their std. buyer protection).
We will be doing this in addition to our regular jobs so please be patient, and we will do our very best to keep you updated with timelines. Harnesses are built using Chrysler spec'd automotive wire (not cheap eBay UL hookup wire like others use). Most people find the quality worth the wait.



------------ ORDER UPDATES/ETAs -----------

---- 12/11/20 ----

To all,
With 2 weeks to go until Christmas, expected shipping delays, etc ... I'm not going to take any new orders until Jan 1st 2021 so I can clear out/focus on the remaining backlog and have a few days off around the holidays.

I thank everyone for their support this year and wish everyone Merry Xmas and a Happy New Year!
(I'll still be around the forum)

Mike G




6/1/20
Side note: ** DeereGuy got promoted at his day job and will only be offering the Obd Bypass Harness and UAQ USB Hub Adapter harness and some Cargo Cam harnesses while he can still get the parts.

See DeereGuy Status.


---------------------------------------------------------------

Disclaimer:
Performing these or any modifications to your truck could void your manufacturer's warranty and/or cause issues with the function of the truck. By purchasing and/or installing any of these custom items (harness, bypass plugs, etc) you agree to absolv M² Mods, Mpgrimm2, Deereguy, and all associates of any and all damages that may occur as a result of installing said item. If you do not agree to this provision, please do not purchase and/or promptly return the item(s) for a full refund (less 15% shipping/restock fee). Additionally, we reserve the right to refuse/cancel an order at our discretion.

I Have full harness in dash of ather truck is it possable to pull apart and keep what I need without cutting wires please and thank you again.

 

[Mpgrimm2]

I Have full harness in dash of ather truck is it possable to pull apart and keep what I need without cutting wires please and thank you again.

Too many factory harness variations between 1500 vs 2500 vs each year vs each trim level to be practical without checking each and every connector/pin/signal between each truck.

Can it be done? With full diagrams, patience and lots of time, sure.

... Exercise in futility? Definitely (IMO).

M² Mods.

 

[Trvsndrsn]

Is the cargo camera harness still available?

 

[likes2build]

^^^^^^^
If it is, I'd be interested in one also. Yes, I'm a harness addict.

 

[Mpgrimm2]

Is the cargo camera harness still available?

^^^^^^^
If it is, I'd be interested in one also. Yes, I'm a harness addict.

@DeereGuy offers them on very limited build runs when he can via his website (often out of stock). Keep checking after Jan 1st.
https://www.kaodtech.com/product-page/2013-2018-ram-2500and-up-chmsl-camera-harness

M² Mods.

 

[Mpgrimm2]

Merry Christmas to all the RamForum RAMily!

See you all again after Jan 1st.

M² Mods.

 

[Mpgrimm2]

Re-quoting this...

---- New orders update 12/11/20 ----

To all,
With 2 weeks to go until Christmas, expected shipping delays, etc ... I'm not going to take any new orders until Jan 1st 2021 so I can clear out/focus on the remaining backlog and have a few days off around the holidays.

I thank everyone for their support this year and wish everyone Merry Xmas and a Happy New Year!
(I'll still be around the forum)

Mike G

M² Mods.

 

[Mpgrimm2]

1/2/20 update ...

My wife tested positive for covid-19 recently and could be doing better. I'm negative for now but not feeling good. We're self quarantined as directed but will have to see how things go.

I'll work what orders I have currently, where I can, but will not take any new orders over the next week or two, or until we're both in the clear.

Mike G.

M² Mods.

 

[likes2build]

Son of a ***** Mike that is terrible news. Prayers to the both of you, just take care.

 

[crash68]

Mike, hoping for a fast recovery for the both of you. Any harnesses can wait, taking care of yourself is more important.

 

[NovaScotia Ram]

Just an update ...

My wife tested positive for covid-19 recently and could be doing better. I'm negative for now but not feeling 100%. We're self quarantined as directed but will have to see how things go.

I'll work what orders I can, where I can, but will likely keep things limited until we're both in the clear.

Mike G.

M² Mods.

I hope both of y'all get to feeling better soon.

 

[MontyNC]

Hope you and your wife get to feeling better Mike.