Need help!

[Rebel_Lady91]

I have recently took my molding off the side of my truck. And i have the glue left from molding still left on my truck i tried goof off but that didnt work it just took my clear coat off. Any ideas ?? Thanks in advance

Sent from my SPH-D710BST using Tapatalk 2

 

[Chewy]

Good off took the clear off? I use 3M adhesive remover which body shops use. Kerosene and WD-40 works as well. The 3M stuff is the best I've ever used though.


Sent from my miniaturizer via tap dancing...

 

[Rebel_Lady91]

Yea i might try the WD-40 next

Sent from my SPH-D710BST using Tapatalk 2

 

[smiley]

Would love to hear if you got it off.


$miley

 

[Rebel_Lady91]

This is he stuff

Sent from my SPH-D710BST using Tapatalk 2

 

[Muddytazz]

I removed mine last month and got from a auto paint supply store what is called an "Eraser Wheel". You chuck it up in a hand held drill and its like a big eraser taking off the glue/stickers/etc without removing the paint. You CAN remove the paint tho if your not careful and sit in one spot. I've used the eraser wheel on many rigs.

 

[Rebel_Lady91]

Thanks i will look in to it

Sent from my SPH-D710BST using Tapatalk 2

 

[SmokedRam]

What I couldn't get off of mine with Goo Gone and a plastic scraper, wore off after a couple washes.

 

[bmiller]

I second the eraser wheel. Any left over residue can be removed with lacquer thinner on a shop rag. It's a bit harsh, but I use it all the time on urethane clears without problems.