Rear spacer

[fadetoblack188]

What rear spacer is everyone using? Looking for either a 3/4 or 1 inch lift.

how are the ones on eBay for 40 bucks? I can’t see spending 200 bucks for to small metal donuts

 

[Ohio5pt7]

What rear spacer is everyone using? Looking for either a 3/4 or 1 inch lift.

how are the ones on eBay for 40 bucks? I can’t see spending 200 bucks for to small metal donuts

I'm using a 2" moto fab in the back along with a 3" in the front. Sits right with 2500s

Sent from my SAMSUNG-SM-G891A using Tapatalk all grammar errors brought you by fat fingers and auto correct.

 

[Ohio5pt7]

My wheel wells are about 40 1/4 up front and 42 1/4 in the rear. I wanted clearance for new wheels and tire not necessarily level since I tow a heavy TT.

 

[BOWERSFJ]

Daystar poly spacers ... Don’t last as long, but quieter ...


Sent from my iPhone using Tapatalk

 

[JB1]

Here’s a good thread for ya

https://www.ramforum.com/threads/rear-75-or-1-poly-spacer-does-it-exist.151476/#post-2138793

 

[Brian Reyes]

I got a question for everyone, I had 2.5 procomp front level's installed recently and I have noticed that the rear passenger side is lower than the driver rear. So i went and measured them and it is lower by a bit more than half an inch. Has anyone had this issue or does anyone have any idea as to what it could be.

 

[BOWERSFJ]

Full tank of gas, and driver weight compensation ... Or just mismatched springs ... One of the two


Sent from my iPhone using Tapatalk

 

[Brian Reyes]

Full tank of gas, and driver weight compensation ... Or just mismatched springs ... One of the two


Sent from my iPhone using Tapatalk

mismatched springs, would that have come from factory like that? I dont remember noticing a tilt like that.