Receiver hitch adapter sleeve

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Snackchaser

Junior Member
Joined
Nov 23, 2021
Posts
5
Reaction score
5
Location
california
Ram Year
2022
Engine
hemi
Just took delivery of a 2022 RAM 2500 limited and noticed it didn't come with a receiver adapter sleeve and pin to reduce from 2.5" to 2". Does anyone know if the reducer sleeve is supposed to be included with the new trucks? One was included with my 2016 2500 RAM.
Thanks,
Snackchaser
 

audiophile

Senior Member
Joined
Aug 13, 2015
Posts
1,033
Reaction score
1,091
Ram Year
2016
Engine
5.7L
Just took delivery of a 2022 RAM 2500 limited and noticed it didn't come with a receiver adapter sleeve and pin to reduce from 2.5" to 2". Does anyone know if the reducer sleeve is supposed to be included with the new trucks? One was included with my 2016 2500 RAM.
Thanks,
Snackchaser
Yeah,it should have. Every HD I have sold this year had the sleeve. I would contact your salesman and inquire. They should make this right.
 

Papa Red

Papa Red
Joined
Oct 28, 2019
Posts
2,576
Reaction score
938
Location
Nebo, NC.
Ram Year
2020
Engine
6.4 Hemi
Mine was located under the drivers side rear seat storage. Just the reducer, no pin.

Red
 

Zoe Saldana

Senior Member
Joined
Nov 12, 2020
Posts
926
Reaction score
774
Location
california
Ram Year
2016
Engine
6.4l
Just took delivery of a 2022 RAM 2500 limited and noticed it didn't come with a receiver adapter sleeve and pin to reduce from 2.5" to 2". Does anyone know if the reducer sleeve is supposed to be included with the new trucks? One was included with my 2016 2500 RAM.
Thanks,
Snackchaser

Did you look in the rear bins? That's where mine was.
 

odinjunior

Senior Member
Joined
Mar 29, 2017
Posts
170
Reaction score
184
Location
Az
Ram Year
2023
Engine
3.6
2021 3500 Mine was under the rear seat. Reducer but no Pin.
 

OC455

Senior Member
Military
Joined
Apr 20, 2018
Posts
3,055
Reaction score
2,645
Location
Central NY
Ram Year
2018, 2019
Engine
5.7 Hemi Big Horn, 6.4L Hemi 3500 Longhorn Mega cab
The reducer for mine was in the very bottom of the center console. Didn't know it was there until after I bought another one.....no pin though.
 
Last edited:

Floyd1979

Senior Member
Joined
Nov 21, 2017
Posts
121
Reaction score
178
Ram Year
2009
Engine
Hemi 5.7
Did you find it ?

Same as everyone else, under back seat, no pin
 

Marshall

Senior Member
Joined
Apr 17, 2013
Posts
1,022
Reaction score
774
Location
Sk, Canada
Ram Year
2014 sport
Engine
5.7 hemi
Reminds me of mt BIL, in later life he bought a 2008 1500 club cab and had it for 6 months before I showed him where I keep my tools, he did not know about the bins, mind you he never read a manual in his life.
 
OP
OP
S

Snackchaser

Junior Member
Joined
Nov 23, 2021
Posts
5
Reaction score
5
Location
california
Ram Year
2022
Engine
hemi
Thanks for all the replies. it was not under the back seat and the dealer agreed give me a new one. However, after re-reading the answer about the "rear bin," I opened the storage compartment under the back floor mat, and there it was, with no pin.
Snackchaser
 

Knucklebuster

Junior Member
Joined
Nov 2, 2020
Posts
17
Reaction score
7
Location
Harstine Island WA
Ram Year
2021 Laramie Night edition
Engine
6.4 Hemi
Under back seat as well. I drilled a hole and tapped a thread, installed a set screw to keep it in there without a pin, works great!
 

Gottabdcheese

Member
Joined
Feb 20, 2019
Posts
68
Reaction score
20
Location
California
Ram Year
2019
Engine
5.7 Hemi w/etorque
Great post!! Just picked up a 2500 mega cab and was looking for this. Found it in the storage behind the passenger seat on the driver side.
 

MN2500

Junior Member
Military
Joined
Apr 25, 2021
Posts
21
Reaction score
9
Location
Caledonia, MN
Ram Year
2023
Engine
5.7 ltr ecoTorque
Under back seat as well. I drilled a hole and tapped a thread, installed a set screw to keep it in there without a pin, works great!
Up here in Minnesota you don't need a set screw. Leave it in long enough and it will be rust welded in place!
 
Top