Rough/Stalled shifting through low gears

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

09TRX4

Member
Joined
Sep 15, 2014
Posts
62
Reaction score
1
Ram Year
2009
Engine
Hemi 5.7
I bought my 09 1500 used about a month ago. Ever since, it seems to have an issue shifting from 1-2 and 2-3 gear. It almost feels like it stalls between shifts. Any one know what the issue could be??
 

darthdzl

Senior Member
Joined
Oct 27, 2014
Posts
828
Reaction score
255
Location
Phoenix, AZ
Ram Year
2017 Tradesman RCSB
Engine
V6
Dumb question, but have you checked transmission fluid? Is it full? Clean, or at least not black and nasty?
 
OP
OP
09TRX4

09TRX4

Member
Joined
Sep 15, 2014
Posts
62
Reaction score
1
Ram Year
2009
Engine
Hemi 5.7
Just checked, she's clean and full!
 

Grad12

Senior Member
Joined
Aug 17, 2014
Posts
269
Reaction score
45
Ram Year
2014
Engine
v6 3.6
Go take it in to get reprogrammed maybe? 6 speed? It may just need to be reset, they're all computer run nowadays.
 

BlownGP

Senior Member
Joined
Feb 10, 2013
Posts
6,141
Reaction score
1,694
Location
Houston/Baton Rouge
Ram Year
2018 RAM Harvest New Holland Blue
Engine
5.7
09s were programmed 5 speeds...

Could be a bad solenoid/s...
 
OP
OP
09TRX4

09TRX4

Member
Joined
Sep 15, 2014
Posts
62
Reaction score
1
Ram Year
2009
Engine
Hemi 5.7
The dealer I bought it from certified it but they must not have done much checking it out. The throttle blade was getting stuck. It was all gummed up, so an induction service took care of it!
 
Back
Top