Suspension help

[Trstrugar]

I am new to this forum and i was hoping to get some help with my suspension. I had the "death wobble" for a while, turned out it was my track bar it was pretty much destroyed. It was a new track bar i replaced it about 6 months before. It looks a like my tie rod and drag link are bent but I'm not sure if that would be a contributing factor to the added pressure on the track bar. When i cycle the steering it looks like the body is moving before the steering catches up, doesn't look right. I was hoping for some guidance on what this could be. She is a 98 Dodge ram 5.9 4x4 sport all stock except for 33s I'm running. Thanks

 

[Magnum5.9]

Don't have alot of knowledge about steering/suspension but if I were you I'd look into a new steering stabilizer and then go from there. It is the shock looking thing that is on the front axle and is parallel to your front axle

 

[Trstrugar]

Thanks I'll try replacing that and see if it helps. It's pretty much toast anyway

 

[Magnum5.9]

ya no problem! My stabilizer is completly rusted(except for the silver rod) and looks like it needs replacing but going 70/75 I get no wobble with 33" MTs so I haven't done it yet

 

[bassslayer25]

I know its not cheap but you probably need to replace all your front end parts. I had death wobble too and after I got a new track bar it went away but not completely until I rebuilt my whole front end. Parts arent that bad but its the labor what gets you. If you can Id rebuild it yourself but if not then its gonna cost a little bit.

 

[Trstrugar]

Yeah I'm trying to do it gradually, next is tie rod and ball joints then hopefully drag link and pitman arm

 

[Trstrugar]

Track bar was really easy but I understand ball joints and coil overs are a little more of a PITA.