Touchy acceleration

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Damaxc

Junior Member
Joined
Jan 15, 2021
Posts
1
Reaction score
0
Location
Tulsa
Ram Year
2021
Engine
Hemi 5.7
I have a 2021 5.7 hemi. The gas pedal is super touchy when first taking off.
Is there a fix for this?
 

Dean2

Senior Member
Joined
Jun 17, 2021
Posts
4,351
Reaction score
8,632
Location
Near Edmonton
Ram Year
2021 2500
Engine
6.4
Welcome.

Is sport or haul mode OFF. If they are both off then you need to learn how to modulate the throttle better. These motors put out a lot of horsepower and torque, if you are used to running lower powered cars it can take a while to get used to these. You can have a tuner installed and have this remapped but that is a lot of expense for a pretty minor issue and isn't warranty approved.

Your dealer may also be able to remap, I don't know that because it would never have occurred to me to ask them to make it less responsive/quick.:Big Laugh:
 

brian42

Senior Member
Joined
Apr 1, 2019
Posts
746
Reaction score
832
Location
San Diego, CA
Ram Year
2019 5th Gen (Sold)
Engine
HEMI 5.7L
Mine has a lag in it if nothing else.

Every now and again it is touchy at certain points and I "reset" the module:

1. Start with the truck off.
2. Get in and shut the driver's door.
3. Turn the truck ON without starting the engine (do not press the brake pedal when pushing the START button).
4. Slowly press the accelerator pedal to the floor and slowly release (should take 10-15 seconds).
5. Turn the truck OFF (push the START button once without touching the brake pedal).
6. Open driver's door to completely "turn off" everything.

It may or may not help your situation but it's free to try.
 

grandpagman

Junior Member
Joined
Jun 28, 2025
Posts
4
Reaction score
3
Location
AZ
Ram Year
2020
Engine
5.7
I have a 2021 5.7 hemi. The gas pedal is super touchy when first taking off.
Is there a fix for this?
HI did anyone ever respond. I just got back into a 2020 Ram 1500 5.7 and I have the same thing. Pedal is super touchy. My 2010 was not that way
 

grandpagman

Junior Member
Joined
Jun 28, 2025
Posts
4
Reaction score
3
Location
AZ
Ram Year
2020
Engine
5.7
That's exactly what I was thinking. Sounds like moving forward RAM has a built-in Pedal Commander, nice.

I guess you could purchase something like a Pedal Commander and could run it in ECO mode.
Hi

So i bought my 2020 used from dealer yesterday. It's possible the previous owner added pedal commander and that is why it's so touchy. Where is that installed and I'll look to see if it has it. If it does will putting it in Eco mode lighten that up. Having previously owned a 2010 Classic , it was not that way. When i jumped in at dealer for a test drive and took off it startled me a bit how light the pedal was.
 

Rav3ncroft

Senior Member
Joined
Jun 14, 2020
Posts
794
Reaction score
813
Location
Indiana
Ram Year
2018 RCSB Sport
Engine
5.7 Hemi
I would expect a dealership would remove anything similar to a Pedal Commander before it was sold. If not, it would be plugged in the OBD port under the dash, near the steering column.
 
Back
Top