leadfarmer
Junior Member
- Joined
- Feb 24, 2013
- Posts
- 3
- Reaction score
- 0
- Ram Year
- 2004
- Engine
- 4.7L 235 hp V8
Vehicle: 04 ram 1500, 4x4, 4.7l, 68,000miles
Problem: So the problem is once i reach 50+ mph, it starts to shake. Though its not terrible at 50, anything above it is worse. Bad to the point i havent seen 70mph in awhile. Also it tends to vibrate when im braking from these speeds or especially going downhill. Its coming from the front end and makes a clicking sound when i turn deep. This is all in 2wd, 4x4 still works.
Solutions tried: Everyone i have asked told me either cvj or u joint. So I replaced the front driver side cvj. The old one had alot of play. Which when removed had some grindings where cv hub meets the differential arm. So we thought we fixed it. Also we took note of the brakes which looked nearly new, same with rotors. This was all driver side. Never checked the u joint.
Am i missing something here? Was it the u joint? Because there isnt one up there i saw?
Problem: So the problem is once i reach 50+ mph, it starts to shake. Though its not terrible at 50, anything above it is worse. Bad to the point i havent seen 70mph in awhile. Also it tends to vibrate when im braking from these speeds or especially going downhill. Its coming from the front end and makes a clicking sound when i turn deep. This is all in 2wd, 4x4 still works.
Solutions tried: Everyone i have asked told me either cvj or u joint. So I replaced the front driver side cvj. The old one had alot of play. Which when removed had some grindings where cv hub meets the differential arm. So we thought we fixed it. Also we took note of the brakes which looked nearly new, same with rotors. This was all driver side. Never checked the u joint.
Am i missing something here? Was it the u joint? Because there isnt one up there i saw?