Zone UCA ball joint replacement question

[808ram1500]

My Zone UCA boot broke and there's grease seeping out and looks like there's no such thing as just a boot replacement. Is the Zone ball joint replacement the only option? Or will any aftermarket pressable uca ball joint work in Zone uca's?

Zone replacement
https://blog.zoneoffroad.com/122-replacement-uca-ball-joints/

 

[Tim Garceau]

It’s just an off the shelf Moog joint, I would contact Zone as it is most likely a larger diameter spline fit since they are heavy duty arms.

if you have the downtime press it out and bring it to the local auto parts store with a micrometer/caliper.

 

[crazykid1994]

Zone actually has a list of all off the shelf compatible ball joints somewhere. One of mine has a leaky boot but I just pump 2 pumps of grease in every once in a while. Besides. You never want to pump in so much grease that the boot is stretched and swollen anyways.

 

[GIJoe2010]

I have an issue with my passenger UCA as well, any thoughts on this?

And no, it’s not overfilled. And the driver’s side is fine.

 

[808ram1500]

My grease nipple did that before too. Used to just wipe it up and call it a day.

The boot on mine was all cracked and brittle, that's why I think it tore. I probably over filled it also. Oh well. The UCA I've had brand new for about going on 2 years I think. About 15k miles on them So the life on the boot would be around service life for it?