Ghost_RAM
Senior Member
So if you are doing 4 doors. I take it that you can swap the chrome part out of a passive entry handle onto the drivers rear existing handle to get rid of the keyhole??
Watched a video on this the other night. It is possible to remove the chrome cap but you have to drill the back area in two spots to remove a couple screws. Or drill the pressed in pin and remove tensioner spring. Then replace with a small screw and nut.
Sent from my iPhone using Tapatalk
Edit: @kp4243 I found it but it wasn't a video. It was a forum post I stumbled across at the other place. I'll PM you a link if you are wanting to try that method.
Last edited: