Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thanks! It should work the same for you too. Let me see if it gets the air filter dirty quicker before you try it.....NICE COREY!!
Wonder if i should try this to my airbox....[emoji848][emoji41]
Sent while firmly grasping my redline lubed RAM [emoji231]
NICE FIND! It does look factory and if that's the case I'm making my cut bigger[emoji106]Check out this video at the 3:45 mark (and throughout the video). Is that factory?
View attachment 164329
Trying another little free mod. The factory air intake gets it's air from the fender but there isn't a real good flow into that part of the fender except around the passenger headlight and from under the truck. I pulled the grill off and saw a spot I could cut a hole into that would feed it fresh air going down the road. The Cummins trucks take air from around the same spot. Pretty simple to make the cut with a Dremel. Yes I know my cuts suck but it won't be seen unless the grill comes off[emoji4] Keep in mind with the honeycomb grill this could be a LOT more obvious.
I'll post later if this actually helps with intake temps or not.
Check out this video at the 3:45 mark (and throughout the video). Is that factory?
View attachment 164329
Yeah mines a 13 so it must have been 14 they started cutting that out. Cool thanks I'm going cut mine like your pic [emoji106]Yup. It's factory. I went out and looked. So, I'm guessing that the factory decided to start doing this in 2014? Cool. One less thing I have to do. Hahaha.
Does it work with the factory shutters?
So it's pretty much confirmed that 2015 and up have this opening and 2013s don't. Anyone with 2014 that can that their grill??
Yup you're right that is a 2014I think that the one in the video is a 2014.
Where is this cut you made?
On the passenger side, lower half of the grille cover??
If so, my 16 has that cut out from the factory.
I just realized he put a grill on from another truck so 2014s might not have this cutout...My 14 does not, maybe that is why Jon’s truck can’t be trans tuned through Diablo but mine was fine?
They are only about $14 from the dealer if you just wanted to put the factory piece in.
I just realized he put a grill on from another truck so 2014s might not have this cutout...