Yeah, I didn't want to mess with those DTC Enable settings. I was hoping I'd get lucky by using non-CANBUS bulbs on my 2015 but it looks like its pretty finicky regarding LEDs. I'll attach the dump so you can take a look. I appreciate all of your help so far Chris!
Just off the top:
You have bi-xenon headlights enabled, those should be set to No
The one that should be enabled is High Intensity Discharge Head Lamps
The voltages showing in that dump are still stock, not sure if you dumped this before or after changing them to 12.2V. Im not sure how the voltage targets apply to DRL when they are set to fog light location. Maybe try disabling the DRLs for now to see if anything changes.
Auto Headlamp ON Threshold: 3.31 V
Auto Headlamp OFF Threshold: 2.55 V
Left Side DRL Voltage Target: 7.4 V
Right Side DRL Voltage Target: 7.4 V
Left Low Beam Voltage Regulation: 14 V
Left High Beam Voltage Regulation: 14.2 V
Right Low Beam Voltage Regulation: 14 V
Right High Beam Voltage Regulation: 14.2 V
Left Front Corner Voltage: 13 V
Right Front Corner Voltage: 13 V
Left Rear Corner Voltage: 13 V
Right Rear Corner Voltage: 13 V
I would make sure you really have LEDs in the positions that are "Set". Like tail lamps, etc. Just to be sure.
LED Reverse Lamps Present: Set
LED Stop Lamps Present: Set
LED Rear Turn Lamps Present: Set
LED Tail Lamps Present: Set
LED Rear Fog Lamps Present: Not set
LED License Lamps Present: Set
LED Front Turn Lamps Present: Set
LED Front Fog Lamps Present: Set
LED Dedicated DRL Present: Not set
LED Low Beam Lamps Present: Not set
LED High Beam Lamps Present: Not set
LED Front Park/Marker Lamps Present: Set