Shugarrckbx
Senior Member
No, all changes will stay, I disconnected my battery, all changes stayed, no problem.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The only way you will lose your settings is if you remove them yourself or the dealer flashes your truck for any reason.I’m sure this has been discussed but I cannot find it.
Will disconnecting my negative terminal on the battery reset the changes I made with the alpha back to factory?
ie... all the LED lights, DRL, Fog drop out etc......
Can you upload your BCM configuration to google drive and post it here? It’ll be easier to figure this out if I can see you current settings as a whole. Also, what are the fault codes stored in the BCM, and what bulb error message does it say on the cluster screen?Hi. I come back again with the topic of converting the rear direction indicators to orange with us - thank you very much for the tips - they came in handy but we have one problem all the time and no idea - we used a new cable for the rear directions and connected it in BCM in F pin 42 and E pin 3, we activated the rear directions output in ALFAobd and turned off the combination lamps - generally everything works, but we have a problem all the time with the indicator of the rear direction indicator right after turning on the car - left and right shows all the time after starting the car - we have already set various options but the error still occurs - although the bulbs are functional and the installation is new - we do not know how to get rid of this error - what else can be set? Maybe someone will come up with an idea.
I did mine and didn't have any issues but I know some people have reported that they did. Im not sure if they typed in the size incorrectly or possibly did something else wrong orcif it was a problem with the tool. I highly reccomend downloading you BCM configuration before you start if you haven't already. I used one of the stock configurations for my 35/12.5/20 Toyo All Terrain Extreme tires. I used the factory setting for the Toyo 35/12.5/18 and it's pretty close. A friend of mine programmed his by entering the correct tire diameter and he didn't have any issue with his either.Great thanks
Also. How difficult is it to change my tire size with alpha? I’ve read some horror stories. I am getting new tires and wheels and will be selling the OEMs.
Great thanks
Also. How difficult is it to change my tire size with alpha? I’ve read some horror stories. I am getting new tires and wheels and will be selling the OEMs.
Are your DRL country code set to Other? I know if they're set for Canada you can't turn them off.I have RGBW switchbacks. They’ve been doing so may odd things. So I decided to disable the DRLs. I’ve gone through every setting I can find which I got from this thread. And they are still on. So it can take some time for the settings to take? Or do you just have to do the settings multiple times sometimes. I waited about 30 mins between each step. And does it matter the order for the steps?
2015 Ram 2500 5.7 slt.
Guy wanted his tpms sensors turned down from 80 to 50. Had the pin and followed the post from earlier and it says threshold is 50 but shows 54 on dash and says add air??
Next tire size configuration went from 17’s to 18’s. I selected the exact tire went for test drive now abs light is on, service trailer brake , and speedo doesn’t work. What in the hell went wrong here?
Sent from my iPhone using Tapatalk
[mention]1500ram12 [/mention] that worked I greatly appreciate your help. Is there any more step by steps?
Sent from my iPhone using Tapatalk
yes enable trailer tow mirrors equipped it is one option I believe under "doors" or such IF I recall I did mine a year agoSo I installed the 1A Auto power fold tow mirrors a couple months ago. Can AlfaOBD be used to orient my TrailRidge mirrors to properly adjust when flipped up? No big deal to me but might use AlfaOBD for other things if I decide to buy it.
update yes my mirrors are "amazon" aftermarket ones and it does workDoors Configuration:
Global Up: Set
Global Down: Set
Sun Shade: Not set
Puddle Lamp Present: Set
Rear Door pre short drop behavior: Not set
Folding mirrors present: Set
Heated Mirrors: Set
Mirror turn signals present: Set
Driver Memory Mirrors Present: Set
Passenger Memory Mirror Present: Set
Electro-chromatic driver mirror present: Set
Electro-chromatic passenger mirror present: Set
Tow Mirror Present: Set
Even with the Trail Ridge aftermarket mirrors?yes enable trailer tow mirrors equipped it is one option I believe under "doors" or such IF I recall I did mine a year ago
Great thanks
Also. How difficult is it to change my tire size with alpha? I’ve read some horror stories. I am getting new tires and wheels and will be selling the OEMs.
Are your DRL country code set to Other? I know if they're set for Canada you can't turn them off.
I enabled the dedicated DRLs on my truck and added the option in the 8.4 radio to turn them on/off. If I'm not mistaken they'll still light up if you remote start the truck(I could be wrong bit it's been awhile since I played with them). All the settings for the DRLs took and worked right away.
Yes, my aftermarkets adjusted once I changed that settingEven with the Trail Ridge aftermarket mirrors?