Lil John
Member
Adc mobile is owned by a guy named Walt. He's a super cool guy and is a straight shooter call him up and chat with him. He did my last truck with a unit like this and I couldn't have been happier.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thank you sir, i was eyeing this one up going to replace my 10.4....I got a PX6 12.1 about a month ago. So far support (just for fitment) has been abysmal. Emails take over a week, and forget about calling. No one answers at least for tech support. If you have a center console and not third seat, the piece they included is entirely the wrong shape and causes friction along side poor fit/finish. The adapter included to hold the buttons like heated seats and steering wheel cause the plastic to pinch and the top right button becomes stuck. I have used very little of the radio's interface because I cant complete a successful installation and don't want everything to looks half assed. Just a heads up for those still looking at them!
They're all made in the same Factory...
Sent from my HTC U11 using Tapatalk
That's good to know. If I opened one of your radios would I see a ZXW mainboard?Linkswell actually has a different factory.. our wiring, hardware, and of course software is all different. Still a China factory of course, but different than Phoenix, Rhino, etc..
He said our........ PSHHHHHThat's good to know. If I opened one of your radios would I see a ZXW mainboard?
Sent from my HTC U11 using Tapatalk
Looking at some pictures of the Phoenix mainboards online, the heat shield and sticker definitely look similar, but the wiring and components on the board look different.That's good to know. If I opened one of your radios would I see a ZXW mainboard?
Sent from my HTC U11 using Tapatalk
What year is your truck? I know that on 2015 and older it's usually a challenge to get the Temperature data for that to work.Has anyone been able to get the temperature display to work. I know it was mentioned in this thread I don’t recall seeing any answer. When I set mine to display it shows 0c then when I reboot it shows 30c
Android 8.1
10.4” screen size
That depends on how deep the DVD player is. Behind that cover you will find the housing for the center console rear AC.So I broke down today and purchased the GEN 4 Linkswell for my Ram. I bought the head unit / tablet, side camera and front camera along with the replacement USB for my benchseat console. I want to add a single DIN DVD and wondering could you install it here. View attachment 207602
It'll probably fit if it single din...that cavity is sizable if you don't have rear vents. Great place to conceal valuables...So I broke down today and purchased the GEN 4 Linkswell for my Ram. I bought the head unit / tablet, side camera and front camera along with the replacement USB for my benchseat console. I want to add a single DIN DVD and wondering could you install it here. View attachment 207602
It'll probably fit if it single din...that cavity is sizable if you don't have rear vents. Great place to conceal valuables...
Sent from my HTC U11 using Tapatalk
Hey Chris, you can save a bunch of money if you just uploaded the movies to the Tesla style radio to the movie folder via USB.So I am looking at this single din https://www.ebay.com/itm/201342559482 it mounts vertical or horizontal. Its a little over 6 inches in depth. I do have rear vents even tho I have a bench seat with fold up console. The more I look at it the more I think it wont work. Might have to get a dvd changer and install it under the seat
On a second thought, those dvd changers are pricey! $300-400 or so and after buying the gen 4 I might have to re-think it.
The jumpseat comes in two variations. One has a factory cd player. You could also probably swap that out and put the DVD player there instead.So I am looking at this single din https://www.ebay.com/itm/201342559482 it mounts vertical or horizontal. Its a little over 6 inches in depth. I do have rear vents even tho I have a bench seat with fold up console. The more I look at it the more I think it wont work. Might have to get a dvd changer and install it under the seat
On a second thought, those dvd changers are pricey! $300-400 or so and after buying the gen 4 I might have to re-think it.
Hi all,
Wow, I gotta say, this is quite some thread! I've already found a lot of help, but am still struggling with some stuff. Phoenix has been radio silent (pardon the pun) even after several emails asking for help. Maybe it's Covid related, but anyway, maybe the smart folks here can help me with some more stuff. I read a lot of the thread, and tried searching for some of the stuff I'm stuck on, to no avail.
Ok, I have a 2018 Ram 1500 Crew cab. Here's what the original stereo looks like:
View attachment 206839
I bought [ PX6 SIX-CORE ] 10.4" Android 8.1 Vertical Screen 1 button Navi Radio for Dodge Ram 2013 - 2018 × 1 from Phoenix.
So far so good...
1) The USB cable they gave me is a mirror image of the one they need. I saw, in thread, that someone else had a similar thing happen and they just cut off some plastic. I'd rather have the right cable, does anyone have the right one, and do you think I can press Phoenix to send me one?
2) I have no idea where the end of the AUX cables are in the dash, the Navi came with cables for the AUX inputs, but as far as I can tell, they were not plugged into the stock radio. I assume the other end of them (the AUX port) is in my center console with the USB cables.
3) I have Air Dual turned off in the settings as the truck doesn't have zones, but dual is still on, and an option in the HVAC screen.
View attachment 206846
4) Also, similarly, I have Temp Unit (Uint in the UI, ha!) set to Fahrenheit, but as you can see in the above image, the outside temp shows in Celcius. Any idea how to change that?
5) The on screen gauges don't work. It defaults to having a tachometer and speedometer on the bottom of the screen. Neither of them do anything. I did not buy any OBD add-ons, but the CANBUS should be working, should the meters show up via CANBUS?
The HVAC system works, (via CANBUS, I think) and as you can see below, I get open door notices and the like. Also below is the version info, because I know someone will want that info to help.
View attachment 206856
6) How the heck do I mute it, like if the radio is playing, there's no on screen mute button I can find (I don't have steering wheel controls).
7) I've got a rear camera that displays in the rearview mirror, and have managed to get its signal to the NAVI, but it doesn't switch to it when I go into reverse. I also thought CANBUS would take care of that, but I also see a revers trigger wire (I think I remember it is green). Anyone know where there's a wire I can tap into with that, or some other way to get the reverse camera to pop on when I go into reverse?
8) My reverse camera doesn't show those cool lines to help you line up as you back up. Is there a way to have the NAVI add them?
9) Any advice for packing everything back in the dash? Right now, I've only got the top of the unit latched in, and some of the cables are binding me up trying to get the bottom in, but I can't see what's going on in there. I've not tried terribly hard, just yet as I'd like to finish all the wiring stuff before I try too hard, and I've not yet dealt with the USB (or AUX) wires.
Ok, I'll stop now before I get to double digits. Any and all help would be much appreciated. There's a lot of cool with this thing, if I can just get past the lack of instructions to set it up well.
Thanks,
Lou
If you are talking about upgrading a PX3 to a PX5 I don't believe there is an upgrade path. The board you referenced doesn't look anything like either of the PX3 boards and the mainboard does contain the MCU if I remember correctly.Well... I’m going a bit nuts (of boredom) and am thinking of giving this a try. It’s a px5 board (the seller also sells px30). If my research serves me right... all that should be needed is a swap and a flash of a compatible ROM for the chip. MCU should be untouched so all should work the same... thoughts??
US $119.99 | WITSON ANDROID 9.0 PX5 Octa-Core +4GB RAM +64GB Flash Coreboard For Android DVD (For Android 8.0 V5XXX only)
https://a.aliexpress.com/_dZ7cqc3