Power Wagons ... Post em up!

wobly · May 30, 2021

LeesEvoX said:
Finally got it stuck today.... like real stuck.. yall know, if I didnt even take pictures.. it was serious.

Sank that ***** to the frame. In some random mud hole, at the beach. That felt/looked like it was full of oil.

Spent almost 2 hours trying to get it out. Every point I could find for the winch, just ripped it straight outa the ground

Finally managed to find some driftwood, and jam it under the rear tires. Luckily the tazer cuts all nannies. So I just mashed it in reverse and got out.. in fact, it was probably the stupid stability control that screwed me in the first place. As soon as I hit that pit it just cut power, and left me dead in the water.

Good times anyway...

Sent from my SM-G950U using Tapatalk

Glad you got it out with no damage.
What Tazer setting cut the nannies?

SkeeterBait · May 30, 2021

Another awesome day in the South Jersey woods...

"Dang it Jeff...stay away from the middle of the hole...!"
Power Wagons are: Fitzreefer, Jeff Kilroy and SkeeterBait.
Wharton State Forest, NJ.

LeesEvoX · May 30, 2021

wobly said:
Glad you got it out with no damage.
What Tazer setting cut the nannies?

The tazer has a setting somewhere that you can save. So when you press and hold the TC button, it shuts everything off. You get an ABS light, Ebrake light etc. But the truck will NOT cut power under any circumstance.

Sent from my SM-G950U using Tapatalk

PW18USMC · May 31, 2021

Sunday fun at Uwharrie. Filling up to head home. Went up the backside of Danial for those who might be familiar. Waiting to buy and install the rock sliders to attempt going through Danial from the start. Did some rock climbing and went to the mud bowl. Used my new ARB dual compressor and air up/down system. Everything worked great. This was my maiden voyage as well. This truck rocks! No issues at all, except being driven by a rookie. Lol!

Dwight Fleagle · May 31, 2021

New to PW. Just traded my 2016 Bighorn for this 21 PW. Loving it.

UTAHPWRWGN · May 31, 2021

The really need to sort out the lack of parking here.

olyelr · May 31, 2021

UTAHPWRWGN said:
The really need to sort out the lack of parking here.

Yeaaaaaaa i feel you will muster through it

Pudge · Jun 1, 2021

Just painted my beadlock rings. Decided to try a diy job because if it doesn’t last, I can always powder coat it later.

Fitzreefer · Jun 2, 2021

A couple more photos of Saturday's romp in the Pine Barrens.

Sent from my Moto Z (2) using Tapatalk

UTAHPWRWGN · Jun 2, 2021

Gooseberry Mesa

TA-PW · Jun 4, 2021

Taking my quad down for some warranty work, a nice 4 hour drive!

PWonly · Jun 6, 2021

TA-PW said:
Taking my quad down for some warranty work, a nice 4 hour drive!View attachment 249583

Sick!

PWonly · Jun 6, 2021

UTAHPWRWGN said:
Gooseberry Mesa

What's AEV telling about the ETA for the front bumper?! They've been quiet, or don't reply at all, on their own forums when people ask about it.

56PW17 · Jun 6, 2021

PWonly said:
What's AEV telling about the ETA for the front bumper?! They've been quiet, or don't reply at all, on their own forums when people ask about it.

I’m seen the bumper on a few 2020 prospectors. What’s the hold up? Is it different for the PW?

PWonly · Jun 6, 2021

56PW17 said:
I’m seen the bumper on a few 2020 prospectors. What’s the hold up? Is it different for the PW?

Who knows. A number of people have been waiting for them, but their silence on the topic is odd.

IRSmart · Jun 6, 2021

56PW17 said:
I’m seen the bumper on a few 2020 prospectors. What’s the hold up? Is it different for the PW?

Speculation is that they are having a hard time adapting the 2019+ Xeon winch for the bumper. Remember, when you want to keep the stock winch on previous models, you had to actually take your winch apart and replace some parts so that it gets oriented properly in the new bumper. New winch means new challenges.

56PW17 · Jun 6, 2021

IRSmart said:
Speculation is that they are having a hard time adapting the 2019+ Xeon winch for the bumper. Remember, when you want to keep the stock winch on previous models, you had to actually take your winch apart and replace some parts so that it gets oriented properly in the new bumper. New winch means new challenges.

So they use a different winch on the prospectors then I take it?

olyelr · Jun 7, 2021

56PW17 said:
So they use a different winch on the prospectors then I take it?

Well, yea, they dont use a power wagon winch. The power wagon winch is different than a normal warn.

olyelr · Jun 7, 2021

PWonly said:
Who knows. A number of people have been waiting for them, but their silence on the topic is odd.

They have always been abnormally silent about their products.

TrailWhale · Jun 7, 2021

PWonly said:
What's AEV telling about the ETA for the front bumper?! They've been quiet, or don't reply at all, on their own forums when people ask about it.

If you look at the FAQ's on the bumper page, they state it works with all 2019+ including the Power Wagon. You'll just have to use an off the shelf Warn winch instead of your factory one.

Power Wagons ... Post em up!

Senior Member

Senior Member

Senior Member

Member

Junior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Member

Member

Senior Member

Member

I drink and I know things

Senior Member

Senior Member

Senior Member

Junior Member

Similar threads

Forum statistics

Share this page