alfaobd

  1. rackemron4

    2026 Ram 1500 Security Bypass Location

    What’s Up. My son has a 2026 Ram 1500 Bighorn. We just installed the electric running boards. Trying to program the BCM with AlfaOBD. The miles are blinking but everything works expect for the manual over ride on the dash screen. I have a security bypass cable but do not see a location for it...
    • rackemron4
    • Thread
    • 2026 ram 1500 security bypass location alfaobd security bypass cable
    • Replies: 19
    • Forum: AlfaOBD
  2. K

    How to convert from factory LED taillights to incandescents, AlfaOBD help

    I want to eliminate the crappy aftermarket LED taillights that “fast dash blink” because computer thinks they aren’t working. And while it’s a great business model to build insanely complex electronics to ensure compliance towards dealer only services and multiple hundred dollars parts, my...
    • ksdoit
    • Thread
    • alfaobd fast blink taillight
    • Replies: 21
    • Forum: AlfaOBD
  3. D

    Unit issue after brake controller activation

    Hi everyone, I just finished the installation of Integrated Brake Controller and performed activation using AlfaOBD. I've activated the Trailer Selected CSM, Trailer Name CSM, Trailer Type CSM as well as ITMB/HWM Integrated Trailer Brake Module. Once completed the option is now available and...
    • DominicS
    • Thread
    • alfaobd trailer brake controller units
    • Replies: 0
    • Forum: AlfaOBD
  4. expressreg

    7 cluster upgrade

    I got the premium cluster upgrade for my 2017 ram express and this is my second one, but for both it was the same problem, when i tried correcting the miles on ALFAOBD it did its little procedure on the cluster but then it says “Procedure Failed” I wait a minute or so and them it says “Procedure...
    • expressreg
    • Thread
    • 4th gen 7 inch cluster alfa obd help alfaobd cluster cluster help milage correction odometer ram
    • Replies: 7
    • Forum: General Discussions
  5. P

    AlfaOBD: Where do I find the Steering Angle Sensor (SAS) information?

    I have a 2014 RAM 1500 5.7 that I just replaced the clockspring on. I switched my old SAS onto the new clockspring and need to view the current angle and recalibrate it, but I've looked everywhere in the android app (v2.4.2.0) and can't find it.
    • pope3909
    • Thread
    • alfaobd sas steering angle sensor
    • Replies: 2
    • Forum: AlfaOBD
  6. W

    2009 ram 1500 Alfaobd TPMs delete

    Is there any step by step instructions on deleting the TPMs sensor on a 2009 1500 with Alfaobd? Everything I read is for trucks with radio frequency hubs I’m pretty sure the 2009 only has a win module.
  7. luvmyhemi

    DRL wire for VLAND LED Projectors... or Alfa OBD ?

    Replacing factory projectors in my 2015 Longhorn with new VLAND LED projectors. The kit came with a wire for DRL that runs to the fuse box. My question is 'Is this wire needed for DRL if I change the configuration values listed below in Alfa OBD? These are the settings I've compiled in reading...
  8. I

    Ra2 trailer brake flash

    2013 ram 1500 tradesman. I had to replace my ra2 because it wouldn't off and restart every 3 minutes. Replaced with a 2015 ra2 my original radio was flashed for the trailer brake so I was hoping I could do the same with this one with the alfaobd but the settings for trailer select/name/type...
  9. S

    alfaobd error

    Trying to change my tire size and set my fog lights to stay on with high beams on my 2012 ram 1500 using veepeak and alfaobd but keep getting the "no control unit confirmation recieved" error. Do I need to get a security bypass or is something else going on? Thanks for the help.
  10. mark413d

    Engine brake always on. Alfaobd

    Hello everyone. I have a question regarding alfaobd and 5th gen 2020 3500. I've been trying to find out of you can use alfaobd to program your truck so that the engine brake is always on. My guess is this is not an available feature, because I've had no luck when searching this feature. Thank...
  11. ConorToot

    Steering Angle Sensor Readings on AlfaOBD

    My brother-in-law and I were looking at my 2012 RAM 1500 SLT 4.7L FlexFuel RWD initially because I have a C121E fault that has plagued me for over a year now, but he noticed something when I had AlfaOBD on the graphing function. He was looking at the readings that I get from the steering angle...
    • ConorToot
    • Thread
    • 1424 alfaobd clockspring cv angle ram readings steering steering angle sensor strange reading turning
    • Replies: 1
    • Forum: General Discussions
  12. S

    Did I ruin my WCM with alfaobd?

    Hi all! I'm thinking I royally screwed up. The truck is a 2011 Ram ST and it came with only 1 blade type key. No fobs. Not knowing RKE wasn't even installed I used Alfaobd to program 2 new fobiks from ebay(non oem). Everything appeared to go the way one would expect and each procedure was...
    • SlippinJimmy
    • Thread
    • alfaobd invalid key received rke skim skreem wcm
    • Replies: 9
    • Forum: AlfaOBD
  13. 1

    2024 2500 secure gateway module location

    Anyone have any idea where the secure gateway module location is on the 2024 2500 BH Sport 4x4?? Cant seem to locate it Thanks is advance
  14. J

    RAM 2500 6.7 diesel 2007 maximum speed

    Hi. I need change maximum speed for that car to 90km/h (55.9mile), because in Finland truck must be limited for that. Question is,( i will use alfaobd software) does OBDlink MX+ support that car, because it check car support list ( https://www.alfaobd.com/supported_cars.html ) There is not MX or...
  15. J

    Remote start and alfaobd

    2013 ram 1500 express hemi. Installed factory remote start and made necessary changes with alfaobd. Works great except If you disable the start by renote, the truck will stop but the ignition stays hot until battery depletes. Any idea why electrical doesn't time out??
  16. Storman22

    Which OBDII reader is best for 2023 Ram 1500?

    Looking to pickup an OBDII reader and then wanting to access and change tire size , as well as potentially make other changes such adding off road info screens etc for other options. Is a bypass cable required for any changes… and is the OBDLink MX+ at $209 CAD worth the price or are there...
  17. B

    Heated Seat Module Issue

    My heated seats and wheel stopped working and I cant get my alfa obd to connect to the heated seat module under the "driver seat" module of alfaOBD. Which module do I scan to get a code saying that it can't be found on the network? I already traced all the wires and all had acceptable...
  18. W

    Remote start with check engine light on

    hi, I have 2016 Ram 1500 eco diesel with orginal factory installed remote start, now it coming out a Check Engine light on. the error said the PFD need repair, but the shop want to change me $1500 to do it, does anyone know how to bypass this error messenge using Alfaobd software , so I can...
  19. J

    Truck on the frame, replaced rear bags alfaobd

    I have alfaobd with the MX,+ Bluetooth. Long story short. Truck would lower the back when parked ,go for a drive and usually raises back up , every once in a while it wouldn't. We'll pulling my boat a month ago and the rear went down wouldn't go back up, unhooked and took it to the...
  20. R

    Alfaobd question?

    Just tried to do a VGT sector gear hysteresis test with alfaobd and OBDlink MX+ and results show that the test is prohibited - internal Turbo Fault. Is there another/different security bypass cable needed for this test? Currently using Zautomotive's security bypass cable with white and green...
  21. J

    Turn signal errors after LED headlight bulb install

    I installed LED high & low beam bulbs in the factory halogen housings, and enabled the LED option for both in AlfaOBD. Took a few days for the headlight errors to stop occurring, but I've been getting front & rear turn signal errors ever since, and I can't seem to figure out what's up. All turn...
    • Jon49522
    • Thread
    • alfaobd canbus error headlight led
    • Replies: 7
    • Forum: Exterior
  22. R

    Alfaobd 2018 Ram 1500 Express

    Hello. I am new to the Forum so I hope I am in the right place to ask a question about my 2018 Ram 1500 Express and the Alfaobd settings. To the point, I wondered if anyone knows what setting I should look for to turn on the footwell lights and also how to turn on the power folding mirror...
    • Rex Everything
    • Thread
    • alfaobd footwell lights power folding mirrors
    • Replies: 6
    • Forum: AlfaOBD
  23. umbighouse

    AlfaOBD - Disabling Window Express feature

    I'm using AlfaOBD to (try to) disable the one-touch window roll down/up feature. Here's what I'm changing: Car Configuration Change | VehConfig 3: Window Express Feature Configuration The original setting was Front windows express only. I changed this to No window express feature, and confirmed...
  24. M

    Will JScan allow DRL always-on configuration on 1500DS

    I would like to set my Daytime Running Lights to ALWAYS ON. I'm looking for an alternative to AlfaOBD, since it only works on Windoze and Android and, as a security professional, I won't use either, since they are both virus magnets. So, I ran across JScan, on the Apple AppStore, that looks like...
  25. XBrav

    Tutorial: Success with AlfaOBD over USB on my '09 1500 5.7

    I wanted to share my tips and tricks on getting the most out of AlfaOBD on my '09 5.7 1500, and hopefully help more people having issues with their setup. As always, YMMV and this is all at your own risk. I've noticed many of the OBD adapters I've used seem to fault when connecting to certain...

Latest posts

Members online

Total: 414 (members: 4, guests: 410)
Robots: 229

Forum statistics

Threads
210,825
Posts
3,058,536
Members
170,660
Latest member
gville35
Back
Top