3" pa body lift pics

[workd4it]

I just oreered my pa 3" body lift and gap guards and got what I think is a good deal shipped to my house for both. $421.58. Anyway anyone have pics of there truck with this installed? I have bills at 2.1 and was looking for some pics to see roughly how it will look. also anyone install this kit and were there any un-forseen issues. or does the kit have everything included for install. I have not found any issues on line as far as brake lines,eletrical etc. thanks

 

[929rob]

Everything is included and installation is fairly easy. If your truck came with tow hooks from the factory you'll have to remove them for the body lift. I bought the non tow hook inserts for the front bumper to fill in the holes. I have billsteins on the front set at 2.1 with 295/65/20's on 20x9 +1 offset wheels and the dual exhaust tips can be loosened and rotated up a bit to align with the new bumper height.

 

[bigolayne]

I had never thought about running my Bils with the body lift until now; looks awesome!!!

 

[Tegspeed813]

Looks good, any pics of the back?

 

[workd4it]

that is exactly the pic and info I needed thanks your truck looks awesome. The pic also showed me what my oem flairs will look like.

 

[Laramie17]

Everything is included and installation is fairly easy. If your truck came with tow hooks from the factory you'll have to remove them for the body lift. I bought the non tow hook inserts for the front bumper to fill in the holes. I have billsteins on the front set at 2.1 with 295/65/20's on 20x9 +1 offset wheels and the dual exhaust tips can be loosened and rotated up a bit to align with the new bumper height.

View attachment 122458

View attachment 122464

Wow! Looks great, i love that blue! Unfortunatly when i bought mine there was no Laramie available in blue with the Rambox.
That's the 3 inches not the 1,5 body lift, right?
And in rear, any coil spacers?
I have bils at 2.1 too and would like a little more height, but do not want to put 2k on a 4" lift..
How did you trim your chrome bumper in rear?
I'm scare to grind it and rust to appear.
Thanks!

 

[929rob]

3" performance accessories body lift. No coil spacers or anything in the rear. Trimmed bumper with air powered cut off wheel and coated the cut area of the bumper with por 15 rust inhibitor. It's been through 2 winters and no signs of rust.

 

[Laramie17]

3" performance accessories body lift. No coil spacers or anything in the rear. Trimmed bumper with air powered cut off wheel and coated the cut area of the bumper with por 15 rust inhibitor. It's been through 2 winters and no signs of rust.

Thanks
You probably heard it a thousand time....but your truck looks awesome!!

I am hesitating between the 1.5 and the 3 inch BL,

Any issue with let say, the radiator hoses kinking or any wires overstreching with the 3 inches?
Any body lowering the rad?

Cant wait to add a bl to my bills at 2,1 like you

 

[929rob]

Everything has been has flawless since the install. No additional squeaks,rattles or problems of any kind. I adjusted the stock exhaust tips up to match the new bumper height. Thanks for the compliments!

 

[iHemiMan]

I just oreered my pa 3" body lift and gap guards and got what I think is a good deal shipped to my house for both. $421.58. Anyway anyone have pics of there truck with this installed? I have bills at 2.1 and was looking for some pics to see roughly how it will look. also anyone install this kit and were there any un-forseen issues. or does the kit have everything included for install. I have not found any issues on line as far as brake lines,eletrical etc. thanks

Where’d you buy your kit from?


2016 5.7L Ram 1500 QC

 

[Ram3405]

Everything is included and installation is fairly easy. If your truck came with tow hooks from the factory you'll have to remove them for the body lift. I bought the non tow hook inserts for the front bumper to fill in the holes. I have billsteins on the front set at 2.1 with 295/65/20's on 20x9 +1 offset wheels and the dual exhaust tips can be loosened and rotated up a bit to align with the new bumper height.

View attachment 122458

View attachment 122464

What lift is that? Super nice truck!

 

[929rob]

It's the performance accessories 3" kit (P/N PA60203). It comes with the bumper relocation brackets and I added the wheel well gap guards for the front (P/N PA6627).

 

[Gary2]

View attachment 144162 Bilsteins at 1.4 and PA 3" .. no issues at all . Been this way almost a year I guess. I had a 1.5 BL before the 3 but it still didn't look like a 4x4 to me . It still don't look as high as some but I also went for the better ride at 1.4 vs what I had at higher settings and used the 3" bl to compensate some for the lower Bilstein setting I went to

 

[Tim West]

I have a 3 Pa body lift with gap guards. Iv had the BL since 10 and no issues at all. If you have 2 exhaust pips you will have to have them raised up 3".

 

[Gary2]

3" PA body lift and no exhaust Mod just loosened the clamp an adjusted it to what you see . Took about 2 minutes total

 

[mboymopar]

Everything is included and installation is fairly easy. If your truck came with tow hooks from the factory you'll have to remove them for the body lift. I bought the non tow hook inserts for the front bumper to fill in the holes. I have billsteins on the front set at 2.1 with 295/65/20's on 20x9 +1 offset wheels and the dual exhaust tips can be loosened and rotated up a bit to align with the new bumper height.

View attachment 122458

View attachment 122464

That looks sweet!

 

[roadrnnr]

I have bucket seats with the console shifter do I have to do any modifications to the shifter with this lift?

 

[929rob]

That looks sweet!

Thank you!

 

[929rob]

I have bucket seats with the console shifter do I have to do any modifications to the shifter with this lift?

I think the shifter is connected to the tranny with a cable so I don't believe that it will be an issue.

 

[Laramie17]

r

I have bucket seats with the console shifter do I have to do any modifications to the shifter with this lift?

i had that shifter in my 2011 outdoorsman, no issue at all when i did the bl!

Now a new bl is sitting on the shelf.....since à couple of months for the Laramie 2017...
have to find the time!!

Make sûre to share pics!