WilliamS
Senior Member
There is a PIN code puller app on the Google play store somewhere. It's free to download but requires tokens to use if I remember correctly.
15 bucks a hit
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
There is a PIN code puller app on the Google play store somewhere. It's free to download but requires tokens to use if I remember correctly.
For 13+ Rams you click and hold on the second time.For the window global down. Stupid question, but do you have to have a special module to do it or is it installed on all trucks from the factory? I enabled it. Clicked my heels and the unlock three times and held it on third and nothing.
Sent from my iPhone using Tapatalk
15 bucks a hit
For 13+ Rams you click and hold on the second time.
Amazon Kindle Fire
Tried hitting unlock, holding on the third press... nothing.
Hi, there was some conversations about proper voltage for signal lights set to DRL, I have a 2017 Laramie that I I'm still running at full voltage. Just curious, mine seem fine but I don't drive the truck a lot.
Thanks
I'm assuming you're putting LED bulbs in your turns, you have to change the setting of both the front and rear to LED as well as the brake lights and running lights to LED. I've been running my truck like that with Sylvania LED bulbs in all 4 corners for a couple months now with 0 issuesMaybe I missed it but is there a setting to disable the bulb out warning for turn signals? Trying to disable the message and stop hyper flashing.
I'm assuming you're putting LED bulbs in your turns, you have to change the setting of both the front and rear to LED as well as the brake lights and running lights to LED. I've been running my truck like that with Sylvania LED bulbs in all 4 corners for a couple months now with 0 issues
I think these turn off the warning.Nope. I have factory projectors and everything is set to led already. I am playing with some headlights that are working but I am getting the bulb out error message even though everything is working.
Until I find a fix I was wanting to see if there was a disable for the warning.
If it were me I would call Chrysler HQ and complain and ask to file a complaint against the dealer. You own the truck; therefore you own the PIN. If dealer is close by I’d call and ask to speak to parts manager and that you were charged. And then chose not to make a scene at the time as you were in a hurry...blah blah. If they won’t refund it: you will be filing a complaint with HQ. That’s just me and I tend to not be nice in scenarios such as this. Lol
Sent from my iPhone using Tapatalk
By that logic, they should charge for looking up parts too. Because that is the same amount of effort, probably more effort looking up parts. They get paid to be there for parts orders regardless of how many they sell. I consider this a shady dealer.I don't know bro, no one should be expected to work without compensation. If they choose to charge for a service they provide they are well within their right to do so. Just my $.02 though.
The way I see it, it is just a few presses on the keyboard. Plus, you shouldn't be charged for something that you have already paid for..