AlfaOBD

[dwalk19]

Verify that the hour's hasn't changed. It seems although the app will say it failed it indeed did change the hour's


2018 Ram 2500 6.4L Hemi Tradesman

Yeah mine doesn't seem to be changing and I think not sure yet but I think the EVIC is not turning off when I leave the truck

Sent from my SM-G960U1 using Tapatalk

 

[dwalk19]

Yeah mine doesn't seem to be changing and I think not sure yet but I think the EVIC is not turning off when I leave the truck

Sent from my SM-G960U1 using Tapatalk

Ok evic turned off, but gotta figure out why hours are not changing issues

Sent from my SM-G960U1 using Tapatalk

 

[chri5k]

Check post 1 of this thread. There are some links on changing mileage and hours near the bottom of the known working list.

 

[dwalk19]

Check post 1 of this thread. There are some links on changing mileage and hours near the bottom of the known working list.

I just read it, only thing I see to do different is changing them both in succession and then powering down , I'll try that next

Sent from my SM-G960U1 using Tapatalk

 

[Sdpadrez]

Ok evic turned off, but gotta figure out why hours are not changing issues

Sent from my SM-G960U1 using Tapatalk

Do you have a 2013 EVIC?

 

[dwalk19]

Do you have a 2013 EVIC?

I was told it was from a 2014,, it has def gauge so definitely 2013+

Sent from my SM-G960U1 using Tapatalk

 

[Sdpadrez]

I was told it was from a 2014,, it has def gauge so definitely 2013+

Sent from my SM-G960U1 using Tapatalk

I’ve been running into the same issue. What obd are you using?

 

[yerfttam]

Hi Everyone-
Hoping someone can help.

2013 2500 with the 6.7

I am trying to turn off the TPMS and turn on the TPIS, like the 3500’s.

I set Base TPMS and Premium TPMS to “no.”

I set Non-Regulated TPIS to “yes.”

I then used my pin to reset the RF Hub.

In the EVIC, the “Service TPMS” message goes away and I can no longer see tire pressures in the menus.

All that’s fine and good........but the stupid flat tire light is still on.

Anyone have any ideas?

I’ve had success doing things like leaving the fogs on with the brights and setting my tire size.....just can’t crack this one.

I greatly appreciate any ideas.

Thank You!!!

Bumping this post back up. Can anyone help? Thank you!!

 

[Sdpadrez]

Bumping this post back up. Can anyone help? Thank you!!

Doesn’t sound like anyone has an answer. Reach out to [email protected]

 

[1500ram12]

Bumping this post back up. Can anyone help? Thank you!!

Did you check post 1? I believe there is something on changing to a different tpms. If not I believe on cumminsforum there is


2018 Ram 2500 6.4L Hemi Tradesman

 

[yerfttam]

Did you check post 1? I believe there is something on changing to a different tpms. If not I believe on cumminsforum there is


2018 Ram 2500 6.4L Hemi Tradesman

Yes, I followed the directions exactly as listed.

 

[1500ram12]

Yes, I followed the directions exactly as listed.

I don't know if you have to lower the pressure threshold or not
or it's possible that the light needs to be off prior to changing tpms types

2018 Ram 2500 6.4L Hemi Tradesman

 

[yerfttam]

I don't know if you have to lower the pressure threshold or not
or it's possible that the light needs to be off prior to changing tpms types

2018 Ram 2500 6.4L Hemi Tradesman

I tried lowering the pressure.

I think you may be right about the light needing to be off prior to switching to TPIS.

 

[dwalk19]

I’ve been running into the same issue. What obd are you using?

I bought the mx bluetooth adapter and this is the version I have of alphaobd,,,

P.s I was able to do the tpms reset by using directions from a YouTube video,, no issues doing that just got mileage change also but can't get engine/lifetime hours to change

Sent from my SM-G960U1 using Tapatalk

 

[Sdpadrez]

I bought the mx bluetooth adapter and this is the version I have of alphaobd,,,

P.s I was able to do the tpms reset by using directions from a YouTube video,, no issues doing that just got mileage change also but can't get engine/lifetime hours to change

Sent from my SM-G960U1 using Tapatalk

Are you using android phone or laptop?

 

[dwalk19]

Are you using android phone or laptop?

I tried both, couldn't get it to connect were with body computer from phone, but it would connect on Samsung tablet and that's how I changed mileage

Sent from my SM-G960U1 using Tapatalk

 

[1500ram12]

I tried both, couldn't get it to connect were with body computer from phone, but it would connect on Samsung tablet and that's how I changed mileage

Sent from my SM-G960U1 using Tapatalk

I don't know if it's a year truck or year cluster issue with alfaobd and mileage or hour correction but other's have said that it took a few tries to take. If you could, in the 4th gen diy section I have a thread about mileage and hours correction notes. Could you post your info and results in that thread. The more results could show a possible bug with certain year truck/cluster combos


2018 Ram 2500 6.4L Hemi Tradesman

 

[Sdpadrez]

I tried both, couldn't get it to connect were with body computer from phone, but it would connect on Samsung tablet and that's how I changed mileage

Sent from my SM-G960U1 using Tapatalk

I was able to change my mileage just fine. First try. It’s my idle and hours that don’t work. I have been in contact with alexey and him and his partner are working to solve the issue. There have been several requests to get this fixed. So for now just hold tight OR keep trying.

 

[1500ram12]

I was able to change my mileage just fine. First try. It’s my idle and hours that don’t work. I have been in contact with alexey and him and his partner are working to solve the issue. There have been several requests to get this fixed. So for now just hold tight OR keep trying.

Could you post your truck info and cluster in the 4th gen diy section on the mileage correction notes thread. The results could help Alexey in fixing these issues


2018 Ram 2500 6.4L Hemi Tradesman

 

[Sdpadrez]

Could you post your truck info and cluster in the 4th gen diy section on the mileage correction notes thread. The results could help Alexey in fixing these issues


2018 Ram 2500 6.4L Hemi Tradesman

I literally just mentioned that I have already been In contact with Alexey and him and his partner are working on a solution.