Hey guys! I’m having a few issues. I have a 2020 1500 Classic, am using AlfaOBD on Windows with the MX. I can’t update the firmware on the MX because I have an iPhone, so that might solve my issues, but I’m not sure. I also got the bypass harness from Kaodtech and noticed that my CAN module had multiple connections available for it, not only one. I just plugged it to the first connection to the left of each CAN module and it seems to be working fine as I was able to adjust my engine hours after upgrading to the 7” EVIC and select my preferred DRL after upgrading from quads to projectors. Now to the issues: for the life of me, I can’t change the mileage. Tried multiple times, followed all the steps, waited for the check engine light to stop blinking to hit start, waited 5 mins before turning the key back to run and nothing works although Alfa says the procedure was successful. Issue #2 is something I can live with but would love to get resolved. I installed LED bulbs all around my truck with no issues, except from the license plate that is throwing a light out message on the cluster. I changed it to LED license plate bulb-YES and the warning is still there. Any advice on how to solve these issues?
EDIT: just realized there’s an update for Alfa. I have v. 2.2.5 and v. 2.2.8 is available. I will update but it’s past midnight here. Will try updating the mileage again tomorrow.