rangemaster728
Senior Member
I replaced my hood latch w/one with the connector; my truck didn’t have the harness so I just bought the connector kit and ran the wires all the way to pin 11 of the BCM and the ground point under the hood.
Replaced the rubber overlays in my two key fobs as all the contacts were on the circuit board anyway.
Programmed up the BCM, programmed and reset the RF hub. Everything’s working fine.
Pretty easy mod.
Sent from my iPhone using Tapatalk
Replaced the rubber overlays in my two key fobs as all the contacts were on the circuit board anyway.
Programmed up the BCM, programmed and reset the RF hub. Everything’s working fine.
Pretty easy mod.
Sent from my iPhone using Tapatalk