Bilsteins installed!

[Texas Hemi]

There's no rubbing anywhere and they clear the ucas just fine with no spacers.

I really like your setup, I'm looking at doing a similar setup soon. I'm curious, do the tires clear the UCA because you installed the Mevotechs or would it have cleared with the factory UCAs? Not being familiar with the Mevotechs I'm not sure if they are built with a different clearance.

 

[THETANK]

I went the opposite direction on mine, yours looks just fine

 

[roadshow]

Nope. I bought 3/4" spacers but did not install them. I don't think I will either. In the pic it's on uneven ground, but on flat ground it looks perfectly level.



You'll enjoy it!



I was in the same boat as you and finally said screw it and ordered the 35s. These tires actually measure around 34.5x12 and are fairly light for a 35.



Sent from my iPhone using Tapatalk

Thanks for the tip, I plan on doing this as well at 2.8 but didn't want to bother with spacers in the rear either. I already have the rear lift bags installed so I'm not worried about sag when towing/hauling. I'm going to leave my 33" tires on though because I'm a cheapskate for gas mpg lol.