Fat Bobs and a PA Body Lift

[Vaporean]

2012 Dodge Ram 1500 Express CC 2wd

I have been putting in some research here and there and decided to go with the Fat Bobs 2" Leveling kit. Upon receiving these- they just look like pucks, with no real fastening excpet the grooves on the hard plastic. Does any one have experience with these leveling kits, or puck kits? Are they reliable? I have not installed them yet but was going to in the next week or so

I was planning on putting a PA 3" Body Lift in the future. Does this sound like it will work? Any advice? Or am I setting myself up for failure. If the Body Lift pulls everything up from the frame, will the levling pucks (ontop of the springs) be okay?

 

[WhiteExpress]

Most every 2WD coil spacer is just that. There is nothing to mount it to anywho.
This will work just fine. The suspension, especially with the shock in place will never be able to have enough down travel to allow them to pop out.

Speaking of that, you'll want to get yourself a pair of shocks for an equal year 2500 2wd, they're a couple inches longer to allow for your new height.

It's still very likely to greatly stiffen your ride, be warned.