Header question

[tommyboi87]

I ordered a set of long tubes the other night and was wondering how hard they're gonna be to install on a stock mid pipe.

 

[Merc225hp]

None of the stock stuff will work for you, or might be wrong as you are 2wd so not to sure on that.

 

[rowdyram]

I'm pretty sure the 2wd uses the same y-pipe. Merc is right. Ain't gonna fit

 

[dapepper9]

From whati found while i was looming at longtubes is that stock y pipe won't work and that you'll have front ds problems. Being as you're truck is 2wd pipe routing is the biggest problem.

If you for pacesetter what I've read about blow outs is that you need a different gasket and better bolts

 

[tommyboi87]

Well damn.. time to go to midas lol

 

[tommyboi87]

Ok so long story short, I'm gonna need a new y-pipe? And what do you mean front ds problems? I'm wanting to do true duals all the way back to the axle. So I'm probably looking at a shiny penny in other words.

 

[rowdyram]

Put your LTs on and buy some header mufflers...

 

[MagSport]

Front ds

Front drive shaft, your 2wd so it shouldn't be an issue as far as that is concerned

 

[Merc225hp]

If you are going true duals no need for a Y pipe is there, run them straight back. Or do as Rowdyram has suggested.

 

[tommyboi87]

If you are going true duals no need for a Y pipe is there, run them straight back. Or do as Rowdyram has suggested.

No, I guess there isn't lol. Well ill be looking into tubing today. So I'll keep y'all posted with the outcome

 

[tommyboi87]

Ok, the best spot for an X pipe is closer to the headers right? Is so, these long tubes are going to be a pita!