Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I didnt take radio out
Dealer is very wrong about that.Is there a software upgrade for a 2018 3500 8.4 4C NAV UAQ. The dealer told me I could enter my 2017 VIN and the hands free module would recognize I have a 2018 radio and would provide the correct update. When I do that I get a software upgrade, version Uconnect_VP4,18.45.01-My13-17. I am pretty confident that is for the 2017 radio no longer installed. If there is an upgrade, can someone provide a link for it.
Nope. there will be a sticker on the back/side of the radio that has the actual PN. May have to pull the radio unless you have pictures before the install. Should be similar to...
Question. I have a UAQ radio that is at SW version 19.9. I have the zip files for 21.9 from infotainment (which contains updated maps but has bad audio) and 22.6 from this thread (which has good audio but no map files). Should I update to version 21.9 to update the map files and then update to 22.6 to correct the audio or should I just update to 22
6?
My truck came with the 8.4 uconnectNope. there will be a sticker on the back/side of the radio that has the actual PN. May have to pull the radio unless you have pictures before the install. Should be similar to...
68331631Ax
M² Mods.
Question. I have a UAQ radio that is at SW version 19.9. I have the zip files for 21.9 from infotainment (which contains updated maps but has bad audio) and 22.6 from this thread (which has good audio but no map files). Should I update to version 21.9 to update the map files and then update to 22.6 to correct the audio or should I just update to 22
6?
Pull the fuse near the brake booster or disconnect the battery.Anyone know how to reboot 8.4 uconnect i have try combos os buttons find online none seem to work
Sent from my GM1915 using Tapatalk
I thought can be done from the screen, is the cargo cam harness back in stock for sale?
Early MY 17.5 UAx radios could access the engineering menu for a reset but they apparently removed the option for 18/19 radios.I thought can be done from the screen, is the cargo cam harness back in stock for sale?
Sent from my GM1915 using Tapatalk
I seen in my alfaobd menu enable DTV front camera and DTV Side Camer know anything about it?Early MY 17.5 UAx radios could access the engineering menu for a reset but they apparently removed the option for 18/19 radios.
Reach out to DeereGuy about the cargo cam harness.
M² Mods.
Is there a software upgrade for a 2018 3500 8.4 4C NAV UAQ. The dealer told me I could enter my 2017 VIN and the hands free module would recognize I have a 2018 radio and would provide the correct update. When I do that I get a software upgrade, version Uconnect_VP4,18.45.01-My13-17. I am pretty confident that is for the 2017 radio no longer installed. If there is an upgrade, can someone provide a link for it.
Question. I have a UAQ radio that is at SW version 19.9. I have the zip files for 21.9 from infotainment (which contains updated maps but has bad audio) and 22.6 from this thread (which has good audio but no map files). Should I update to version 21.9 to update the map files and then update to 22.6 to correct the audio or should I just update to 22
6?
Just did the update on mine. Didn't look like it saw the USB then I realized I never put the truck in Run... Had remote started it before I inserted the USB. So another thing to look out for.
Sent from my Pixel 3 XL using Tapatalk
Finally got around to trying again and same result. Tried in run with the truck running, nothing. I wound up getting a new media hub with the sd card slot thinking that that might be the issue. didn't fix it though. im about out of ideas. may need to pull the radio to verify the part number. I can play audio from a usb so I know that works at least.
Any ideas @Mpgrimm2?
You should be able to get the part number from the System Information screen. I doubt it would be different than the one on the label.