Boardryan
Junior Member
- Joined
- Sep 30, 2019
- Posts
- 1
- Reaction score
- 0
- Location
- kansas
- Ram Year
- 2012
- Engine
- 4.7-L V-8 SOHC 16V
So I ordered a Kenwood DNR-476S and a backup camera for my 2012 Dodge Ram 1500. I also bought the Maestro Rr interface and then had to get the Maestro CH1 and Maestro AV CH1 adapters for it as well. Long story short I spent about 6 hours trying to install everything. I got all the wires ran and ready to plug and play as it says. However once I get to the plug and play, the Maestro Rr blinks red twice, but only when it is connected to the head unit. My problem is the head unit has no power what so ever. I connected the red, yellow, and black wires to the CH1 harness as the instructions say, yet no power. I tried plugging everything in and no power. The instructions for the Maestro says I don't have to connect all the wires from the head unit harness to the extra wires on the CH1 harness (that's what the Maestro interface unit is for.
How do I get power to the head unit?!
How do I get power to the head unit?!
