Replacing bad factory Leds in map lights, I had a great deal of trouble pulling my console down. One brass clip pulled through the plastic backing panel above. The other clip seems to have half pulled through and became somewhat distorted.
Now one clip will seat and the other slot in the plastic backing is now too big. The console sags on that side.
Anyone have suggestions on reseating a clip where the receiving slot is now too large? It's a lousy design.
Now one clip will seat and the other slot in the plastic backing is now too big. The console sags on that side.
Anyone have suggestions on reseating a clip where the receiving slot is now too large? It's a lousy design.