bcbouy
Senior Member
- Joined
- Nov 12, 2014
- Posts
- 1,730
- Reaction score
- 1,184
- Location
- pitt meadows/100 mile house
- Ram Year
- 2021 power wagon
- Engine
- hemi
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
best name ever...The Great Pumpkin View attachment 247869
PSA for the wheelers here, crawl under your rigs periodically for health checks. I was under the truck for something unrelated today and found this. Luckily I didn’t have a failure on the trail, but by the looks of this, I was about to.
View attachment 248004 View attachment 248005 View attachment 248006
Did you notice any drive line vibration?PSA for the wheelers here, crawl under your rigs periodically for health checks. I was under the truck for something unrelated today and found this. Luckily I didn’t have a failure on the trail, but by the looks of this, I was about to.
View attachment 248004 View attachment 248005 View attachment 248006
In retrospect, yes, I have noticed a vibration at highway speeds, but I attributed it to having to put my spare tire on the left rear and the new tread blocks being a little more aggressive. But now I know it's this. I've already been in contact with a local driveline shop, they're going to use my ends and make me a new steel one for about $300, which I feel is very reasonable considering a new aluminum costs $450ish.Did you notice any drive line vibration?
Sent from my Moto Z (2) using Tapatalk
In retrospect, yes, I have noticed a vibration at highway speeds, but I attributed it to having to put my spare tire on the left rear and the new tread blocks being a little more aggressive. But now I know it's this. I've already been in contact with a local driveline shop, they're going to use my ends and make me a new steel one for about $300, which I feel is very reasonable considering a new aluminum costs $450ish.
Not specifically, it could have been anywhere in my last 2 trips. I literally only found it because I was under the truck for something unrelated.Can you recall an event that might have been the cause of this?
Do mine next!!today hit it with the clay bar,foam cannon,washed and sealed it with some ceramic .waiting on my wax.nice to start from new.did the same when i bought the slt and it looks new from day one till today.maintenance every couple months and good to go.
View attachment 248112
on a new truck.Do mine next!!
View attachment 248684 Another from the Chive..love this one!!
today hit it with the clay bar,foam cannon,washed and sealed it with some ceramic .waiting on my wax.nice to start from new.did the same when i bought the slt and it looks new from day one till today.maintenance every couple months and good to go.
View attachment 248112