Wbhvacer
Member
- Joined
- Aug 8, 2015
- Posts
- 43
- Reaction score
- 14
- Ram Year
- 2015
- Engine
- Hemi
Does anyone know if the sd reader hub can be installed in the place of the aux usb only hub?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
He's asking about the one in the console, not in the dash. You are correct though, the dash is charge only.I'm pretty sure the USB is a charge only port.
The SD card reader with USB hub will not work with a 5.0 radio. Even the USB with the SD reader will not work with 5.0 radios. I have already tried it.
On the other hand, the USB only reader hub will work with the 8.4 radios.
I actually have a usb sd card reader that I plug in and it does work with the 5.0. This is the one I use.
USB 3.0 Dual SD 4-Slot Card Reader 875799 - Micro Center
Me too. Now I'm confused...OK, I read your original post thinking you were talking about the combo SD/USB reader hub that comes standard with RAMS that have the 8.4 radio and not some aftermarket SD reader.
I was asking if the factory sd/usb/aux would work in the place of the usb/aux interface .
..............
No it will not like I mentioned in my first reply. Been there, done that, it will not work with a 5.0 radio. The 5.0 radio has no provision in the software to recognize a separate SD slot, nor will it read off the USB port either.[/QUOTE
Ok,now that's the information I was looking for some one who had tried thaUSB/SD/AUX INTERFACE. Thanks for clearing that portion up.
when I get back home tomorrow I'll post a video of the 5.0 playing mp3s from the SD to USB adapter I use so if any one wants that option at least they will see it does work. Also it worked with my 3.0 before I switched to the 5.0.
Ok,now that's the information I was looking for some one who had tried thaUSB/SD/AUX INTERFACE. Thanks for clearing that portion up.
when I get back home tomorrow I'll post a video of the 5.0 playing mp3s from the SD to USB adapter I use so if any one wants that option at least they will see it does work. Also it worked with my 3.0 before I switched to the 5.0.