"Tesla Style" 10.4 Android Radio Information

[Wizard]

Lol, I think I'm helping your buyer now. Where did you buy it from and what was the factory radio in your truck?

Sent from my HTC U11 using Tapatalk

Mine is a 5 speed fan.

 

[Wizard]

Also what is this black plug with the blue wires going to?

Sent from my HTC U11 using Tapatalk

#############

to better understand here's the back of the oem AC block where the two plugs were connected the black and white

 

[jmckeejr]

Lol, I think I'm helping your buyer now. Where did you buy it from and what was the factory radio in your truck?

Sent from my HTC U11 using Tapatalk

Yeah you are, lol. I got the radio from Rhino radios, they're also looking into it. I've not heard of a 5 speed fan, but I've also not looked at anything in 2013 Rams as mine is 2014. I had 4 speed (but now have 7 speed conversion). I'm going to open up my radio tonight or tomorrow to put in lockpick module, so will get picks of the original climate controls harness and pins to compare.

 

[Wizard]

Yeah you are, lol. I got the radio from Rhino radios, they're also looking into it. I've not heard of a 5 speed fan, but I've also not looked at anything in 2013 Rams as mine is 2014. I had 4 speed (but now have 7 speed conversion). I'm going to open up my radio tonight or tomorrow to put in lockpick module, so will get picks of the original climate controls harness and pins to compare.

I told you that if I get it running I will keep it Just let me know what should I do. BTW my truck should be the same with your in its original config. there was virtually no difference between 2013 to 2014 ... look at your old AC block the part number should be the same as the one in the picture

 

[SitKneelBend]

#############

to better understand here's the back of the oem AC block where the two plugs were connected the black and white

View attachment 215784

Interesting. Here's what a 2014 7 speed looks like...

I believe Ram Lo might actually be the correct setting for you and I believe you have a 4 -speed fan.

I'd like you to set it back to Ram Lo and and afterwards use the pinhole reset on the front to reboot.

Sent from my HTC U11 using Tapatalk

 

[Wizard]

Interesting. Here's what a 2014 7 speed looks like...

I believe Ram Lo might actually be the correct setting for you and I believe you have a 4 -speed fan.

I'd like you to set it back to Ram Lo and and afterwards use the pinhole reset on the front to reboot.

### IN a minute ...will report back

 

[Wizard]

Interesting. Here's what a 2014 7 speed looks like...

I believe Ram Lo might actually be the correct setting for you and I believe you have a 4 -speed fan.

I'd like you to set it back to Ram Lo and and afterwards use the pinhole reset on the front to reboot.

Sent from my HTC U11 using Tapatalk

#################################

Selected Ram Lo / Ch* with Bagu - saved and rebooted then once it started used the pinhole and did another reboot. AC controls are still dead nothing changed.

 

[SitKneelBend]

#################################

Selected Ram Lo / Ch* with Bagu - saved and rebooted then once it started used the pinhole and did another reboot. AC controls are still dead nothing changed.

Can you take a picture of your on screen AC controls? I'd also like to see a picture of the screen where you select the protocol. Finally a third picture of your CANBUS adapter (a little red or black box that came with the radio and is plugged in the back.

Sent from my HTC U11 using Tapatalk

 

[jmckeejr]

I told you that if I get it running I will keep it Just let me know what should I do. BTW my truck should be the same with your in its original config. there was virtually no difference between 2013 to 2014 ... look at your old AC block the part number should be the same as the one in the picture

I think you probably have 4 speed fan. I'm going try to post picks of my original hvac plugs and current plugs. The wide white one and I think the red one? I am not sure since it all runs through red one now and custom harness.

 

[jmckeejr]

Can you take a picture of your on screen AC controls? I'd also like to see a picture of the screen where you select the protocol. Finally a third picture of your CANBUS adapter (a little red or black box that came with the radio and is plugged in the back.

Sent from my HTC U11 using Tapatalk

Blue box I think

 

[SitKneelBend]

Blue box I think

Or blue! The Rhino guys use a different one too I guess...

Sent from my HTC U11 using Tapatalk

 

[Wizard]

Here they are

 

[Wizard]

red

Or blue! The Rhino guys use a different one too I guess...

Sent from my HTC U11 using Tapatalk

 

[SitKneelBend]

red

Here they are

View attachment 215801

View attachment 215803

Ok, it appears there is no signal passing across your CANBUS. Are there dipswitches on your red CANBUS adapter?

Sent from my HTC U11 using Tapatalk

 

[Wizard]

Ok, it appears there is no signal passing across your CANBUS. Are there dipswitches on your red CANBUS adapter?

Sent from my HTC U11 using Tapatalk

No dipswitches on the outside and since it is somehow transparent it appears none inside either. Here are the pictures of all steps to get to the protocol.

 

[Wizard]

Ok, it appears there is no signal passing across your CANBUS. Are there dipswitches on your red CANBUS adapter?

Sent from my HTC U11 using Tapatalk

the instrument cluster sees the radio is playing it doesn't see the frequency, the radio sees when the door is open so some canbus goes through

 

[SitKneelBend]

the instrument cluster sees the radio is playing it doesn't see the frequency, the radio sees when the door is open so some canbus goes through

Ok under the system settings menu there should be two places for the baudrate. I the setting for both should be 38400. Is that what they are set to?

Sent from my HTC U11 using Tapatalk

 

[Wizard]

I don't have a baud rate in sys settings or anywhere else. Attached is the scrn from sys settings

 

[SitKneelBend]

I don't have a baud rate in sys settings or anywhere else. Attached is the scrn from sys settings

View attachment 215812

View attachment 215813

Sorry, there's another hidden menu. If you go to the system info screen and press (and hold) on the information window for 5 seconds a password screen will appear. Enter 7890.

Sent from my HTC U11 using Tapatalk

 

[Wizard]

Sorry, there's another hidden menu. If you go to the system info screen and press (and hold) on the information window for 5 seconds a password screen will appear. Enter 7890.

Sent from my HTC U11 using Tapatalk

on it now