What did you do with your 4th Gen this week?

[Stefan N]

What's the measurement between the cases while stowed Sir ?
Wondering if my 4 wheeler would still fit [emoji106]

Sent from my SM-G930V using Tapatalk

45"

each box sticks out a hair under 8" from the rear bed pillar

 

[R.L.K.]

Primed and painted my Mevotech uppers last night and got them put in as well as Bilsteins set at 2.8 up front, Bilsteins in the rear, and Daystar 1.5” spacer in the rear. Sitting at 39” up front (from 36.5) and 41” in the rear (from 39.5). Need to get it aligned next.

I did this exact same thing !
3years ago [emoji1303][emoji1303]

Sent from my SM-G930V using Tapatalk

 

[Devildog8791]

Added an eBay limited grill to my 2012:
View attachment 127888

How is the fit on that grille? I am guessing that is not an OEM grille.


Sent from my iPhone using Tapatalk

 

[walnuts4x4]

Got LEDs in plate lights, cargo and back up lights and replaced all the speakers kicker 3.5 and mephis audio 6.5s... way better than the stock set up...

Sent from my Pixel 2 using Tapatalk

 

[69GWC]

Installed my DeeZee 5 drawer tool box. Going to do a Swing Case on the other side at some point.

 

[corneileous]

Well I don’t know about y’all, but I think on a darker truck anyways, that they look much better without that tape on the doors between the windows. Finally got a pic snapped and uh, I’m very happy with the results. That Max Steel paint is just too pretty to cover up...[emoji41]

This was before...



Sent from my iPhone using Tapatalk Pro

 

[Akhsarbek Aylarov]

That looks so bad ass!!
Too bad there isn't a company that makes rears as well with the red calipers. I would want the full set. BAER and Wilwood might make some, but I'm not spending that kind of money for brakes on my daily driver. My car yes, but not my daily. lol

Company who made me a set of BBK for my Bmw, Ceika-performance,

they would make a set for ram as well, it would run around $4k for a set for both axles.
But if you drive it daily those brake pads would be an expensive item to deal with lol

 

[corneileous]

Debating that move also [emoji848]


Sent from my iX using my iThumbs via Tapatalk

Well, I don’t know about yours but pretty much the majority of the reason of what did it in for me other than just not really liking it in the first place, was the way that the stuff wrinkled where the screws hold the window trim into place at the bottom of the windows. Was like this on both sides, all four doors.
That, and I liked the blue showing there on the old Ram as well. I’m very pleased with it and glad I took the **** off....lol.


Sent from my iPhone using Tapatalk Pro

 

[BiGMERF]

Added some underglows today.


Sent from my iPhone using Tapatalk

 

[Ravjay12]

How is the fit on that grille? I am guessing that is not an OEM grille.


Sent from my iPhone using Tapatalk

It’s not an OEM grille. The fit is nice and tight for an aftermarket. The center section can be removed if you want to paint the outside ring a different color. I don’t know how well the finish will hold up because it’s a cheap grill, but so far so good!

 

[TXFireMedic]

Well I don’t know about y’all, but I think on a darker truck anyways, that they look much better without that tape on the doors between the windows. Finally got a pic snapped and uh, I’m very happy with the results. That Max Steel paint is just too pretty to cover up...[emoji41]

This was before...



Sent from my iPhone using Tapatalk Pro

Dude!!! I’m doing this. I have the max steel and have been debating on this. Sold!!!

 

[nateinva]

Tuned, cammed and stalled....have turned my attention to the interior. A little transformation...

 

[bookemdanno]

I took mine in yesterday for the brake transmission shift & water pump recall. I told them I had the pump that needed replacement, but they had to visually inspect it. So of course they determined I needed replacement, but no part available. Dealer still only able to order 4 per week. I go back on 6/11 for my last free oil change. Hopefully they have one for me then!


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

 

[CLOUDL1GHT]

Changed my oil on monday
Rotated my tires yesterday
And got a mag-hytech diff cover as an early birthday present today. One more piece in the regear project.

 

[S0CAL]

Changed my oil on monday
Rotated my tires yesterday
And got a mag-hytech diff cover as an early birthday present today. One more piece in the regear project.

@CLOUDL1GHT where are ya in Tx?

 

[DRkNESS]

Changed my oil on monday
Rotated my tires yesterday
And got a mag-hytech diff cover as an early birthday present today. One more piece in the regear project.

Happy soon to be birthday to you. [emoji512]


Father Of Four

 

[JimsRamTruck2012]

Here is another boring post about me filling the 2012 with fuel.

 

[deanoldo]

I hooked up the trailer and moved from Boise to Vancouver, WA. I took the long way across Oregon and did some camping along the way. The truck pulled the trailer great. I was getting about 2 miles per gallon pulling some of the passes, but I was doing 60, so.... Overall, I averaged about 9mpg over 5 passes (not super high) and rolling terrain. The truck sags about a half inch with around 750lbs of tongue weight. I'm still debating some air bags to fix that as I'm not over payload, but we'll see.

Dean

 

[BrianandChrissy]

I hooked up the trailer and moved from Boise to Vancouver, WA. I took the long way across Oregon and did some camping along the way. The truck pulled the trailer great. I was getting about 2 miles per gallon pulling some of the passes, but I was doing 60, so.... Overall, I averaged about 9mpg over 5 passes (not super high) and rolling terrain. The truck sags about a half inch with around 750lbs of tongue weight. I'm still debating some air bags to fix that as I'm not over payload, but we'll see.

DeanView attachment 128456

I have the airlift 1000 system. I ABSOLUTELY love it, and highly recommended it.

Sent from my LGMP450 using Tapatalk

 

[Gordinho80]

I hooked up the trailer and moved from Boise to Vancouver, WA. I took the long way across Oregon and did some camping along the way. The truck pulled the trailer great. I was getting about 2 miles per gallon pulling some of the passes, but I was doing 60, so.... Overall, I averaged about 9mpg over 5 passes (not super high) and rolling terrain. The truck sags about a half inch with around 750lbs of tongue weight. I'm still debating some air bags to fix that as I'm not over payload, but we'll see.

DeanView attachment 128456

I just installed AirLift bags on my 2012 1500 Crew. My trailer is a 28' Coachmen Futura. Haven't had to pull it with my truck yet to see how it handles... but the dry weight of the camper is listed at about 4700lbs and we are totally overhauling it; ripping out cabinets and redoing all of the furniture. Will be weighing it when I do get it done.