Boohoops
Junior Member
So I recently bought Toyo MTs 35x12.5R20 for my 2012 1500. It has the bilstein leveling set up on it. I also have aftermarket rims but I don’t know the actual offset as they came with the truck when I bought it.
I now rub on the uca’s at almost full lock. Makes parking lot maneuvering a b*tch haha
My question is, judging by the attached pics, what size spacer do y’all think I should run? I only want to solve the rubbing issue and not need to cut studs. I was originally thinking .25” but now am considering .5”
TIA!
*Disclaimer: Did some research on wheel spacers on here, and no one seems to be running anything smaller than 1” spacers.
I now rub on the uca’s at almost full lock. Makes parking lot maneuvering a b*tch haha
My question is, judging by the attached pics, what size spacer do y’all think I should run? I only want to solve the rubbing issue and not need to cut studs. I was originally thinking .25” but now am considering .5”
TIA!
*Disclaimer: Did some research on wheel spacers on here, and no one seems to be running anything smaller than 1” spacers.