If you have it selected in the radio settings and you flip the stalk forward when the headlights are in the auto position by the dial and you get the automatic high beam enabled in the evic then I am at a loss. I will say they are more sensitive than what was in my GC. Depending on light levels (driving at dark), they will not come on below a certain speed and will not be on when stopped.
Yes, I removed the ASBM Present from the auto high beam set because I found out having it selected made no difference in them working. It is one of the settings I originally set because I was having difficulty getting them activated. Check the link in this post that Mpgrimm2 directed me to.
Enabling factory option codes without the dealer
My issue ended up being in the program itself. When selecting Auto High Beam Module Location, it would not take the setting “ECC_AHBM". After contacting the developer, he sent out a patch that corrected the issue. Check the location and make sure yours reads "ECC_AHBM". Pay attention to when you select it if it reads at the top the current configuration of that setting. It should tell you. Beyond that, I am not sure.
View attachment 136339