Good evening all!
2019 Ram 1500 Express Classic
OEM 8.4 4c UAS Radio (w/ carplay/Android auto)
Customtronix Enzo Jailbreak for front camera
40/20/40 Front (jumpseat) Cloth/Manual
Bench Rear Cloth
Installed Parts:
2015 Laramie Longhorn Driver/Passenger Seats (memory/heated/vented)
2015 Laramie Longhorn 60/40 Rear Seats (heated)
New Heated Seat Module - 68217268AF
New Heated Clock Spring - 68110740AE
New Heated Steering Wheel - 5NH65DX9AA
New Rear Right Heated Seat Switch - 68059873AC
New Rear Left Heated Seat Switch - 68059874AC
New *Partial Console Harness - 68398181AA
New Inverter Dash Plug
M2Mods Wiring Harnesses
*Disseceted out the rear seat button portion of the console harness and merged it with my jumpseat harness.
AlfaOBD Settings "Enabled/Yes"
Cabin.Net - MSM Memory Seat Module
Cust.Set.Menu 1: Auto-on Driver Comfort CSM
(Option 2-3)
Cust.Set.Menu 1: Easy Exit Seat CSM
Cust.Set.Menu 2: RKE Linked to Memory CSM
ECUConfig 3: Front Vented Seats Present
ECUConfig 3: Front Heated Seats Present
ECUConfig 3: Heated Steering Wheel Present
ECUConfig 3: Memory CSO Present
ECUConfig 4: Heated Seats Present
Memory: Rear Heated Seat Present
Memory: Front Vented Seats Present
Memory: Heated Steering Wheel Present
Memory: Heated Wheel Material - Leather
Memory: Seat Material - Perforated Leather
Memory: Memory Seat Present
**Couldn't find Cabin Net: Heated Seat Module Initialize**
Currently have everything installed for a test fit/test function.
Working properly:
Driver/Passenger Seat power functions
Inverter Plug
Left/Right Rear Heated Seat Switches
Left/Right Rear Heated Seat Heating Elements
Not working:
Heated Steering Wheel shows in radio under controls. When pressed, turns on for ~5sec then turns off.
Heated/vented seat icons MIA in radio.
-have double-checked Alfa
-have cycled radio
-have given radio days to take changes
-have pulled fuse to hard reset radio
I wasn't able to find the HSM initialize command in Alfa and am wondering if that might help the HSM and radio communicate.
I can connect to both MSM and HSM through alfaobd.
In the MSM I have a code B1D98. I ran a system check and the seat moved, but test stated failed.
In the HSM I had a code U1446. I was able to function the vents on high and low correctly as well as heat, but the test ends before you can really feel any heat in the seat.
I am NOT using the hard button panel, due to having the 5 aux buttons populating the bottom row. Unfortunately can not check functionality there.
My new heated steering wheel came with 2 connectors, one white, one black. The white one connects to the clockspring, the small, 2pin, black connector doesn't have a home. I'm using the wheel harness that came with my express steering wheel, do I need to purchase/install a specific heated wheel harness?
Sent from my iPhone using Tapatalk