Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
one of the best hemi uoa's I ever seen, no issue here.I got my uoa. Break it down boys! It seems like the wear metals are high. I'm thinking it's due to cold Canadian weather taking its toll?
Lubegaard is difficult to get in Canada. To get higher moly, I think the only option would be redline 5w30.
gTl base liquid can do that, do not worry about anything, not even lubegard. If you want to do it yeah ok, but you have one of those rams we all wish we had. I wouldnt change anything either, I wouldnt run redline at this point at all, it is now a high mileage ram, the only time to run redline if if you get lifter tick. Perfect report there..The flashpoint on my uoa is lower than what it should be. I'm not quite sure what that means.
Lubegaard is difficult to get in Canada. To get higher moly, I think the only option would be redline 5w30.
gTl base liquid can do that, do not worry about anything, not even lubegard. If you want to do it yeah ok, but you have one of those rams we all wish we had. I wouldnt change anything either, I wouldnt run redline at this point at all, it is now a high mileage ram, the only time to run redline if if you get lifter tick. Perfect report there..
Here's another report from my Ram. Iron went down again, continues to run well with PUP.
I've still been using a bottle of the MOS2 with each change...I think PUP is something around 50ppm moly without the added MOS2.looks good, 5w30 pup has 200ppm moly these days? Looks like one of those million mile rams.
The truck was originally an AZ market truck - have to believe it does. It is also one of the few I have seen that came without a transmission thermostat!Those copper levels are enviable! Guess you don't have the heavy duty cooling system or whatever Ram calls it?
Heavy Duty Engine Cooling Heavy Duty Transmission Oil Cooler |
Here's another report from my Ram. Iron went down again, continues to run well with PUP.
looks good thanks for posting. Smart move not getting tbn, not needed anymore if you are staying with a 4k interval. Once again lubegard adds 100ppm, cool to verify that. Also, you see the heavy esters and moly raise copper in uoa's, but as you can see not the case with biotech at all, despite raising moly and adding esters. Good report thanks.Heres my latest. Previous test no Biotech Lubegard, this test is with it. PUP5w30, RP filters. View attachment 522293