replacement

  1. Hooke Road

    How can you tell if a crack or chip in a windshield needs repair or replacement?

    The decision to repair or replace a crack or chip in a windshield depends on several factors: Size: If the crack or chip is larger than a quarter, it will likely need to be replaced. Chips smaller than that can often be repaired. Location: If the crack or chip is located in the driver's line of...
  2. E

    2017 Rebel front silver skid plate replacement

    Hello, I was hoping someone might know what color the front skid plate comes in as when ordered from Mopar. The part number is 5SX96JSCAC. Someone backed into mine and made contact with a trailer hitch and unfortunately where it hit; the dent couldn't be pulled out enough to not bother me lol...
    • evant3
    • Thread
    • rebel bumper replacement skid plates
    • Replies: 6
    • Forum: Exterior
  3. Bigredhemi

    Local Ram friendly shop for Cam and or Engine Replacement

    Misfire on #3, looks like Cam and rollers worn out. I have 260,000 on a 4.7 2013 4x4 1500. I'm looking for a trusted shop to fix or replace the engine. I have done all the maintenance and work to get the truck to 260,000 Miles and am very familiar with mechanical work (I have had a 1997 Land...
  4. D

    ANISN FLEXPLATE REPLACEMENT

  5. G

    Replacing the rear pinion seal (Help needed)

    Hello, I'm in the process of replacing the rear pinion seal on my 2006 Dodge RAM 1500 5.7L, i have already took off the old pinon seal and the new one is ready to install but i don't know what's the best way to press the seal onto the diff, i don't have a seal installer tool or a big enough...
  6. H

    Water Pump replacement

    I will be replacing my water pump soon as it is leaking around it is light but I want to replace it either way. I would like tips on how to do the replacement as well as where do I buy the water pump from. I will be replacing the thermostat too along with the new coolant. It is my first time so...
  7. M

    Headliner replacement

    I have a 2013 ram 1500 quad cab that I removed the headliner from, long story short i muffed it and need a new one, molar no longer makes them for that model year, was planning on ordering another one from a later year thinking the cab dimensions didn’t change, but they don’t allow returns...
  8. M

    ECM wiring harness replacement

    Hello, not sure if I am posting this in correct location...someone please move if not... 2016 Ram 1500 5.7 Have taken my ecm board out one too many times, and the connectors have broken. Not only the outside part with the red locking lever, but the actual connector with the green and blue tabs...
  9. M

    Air Diverter Valve Replacement 2016 Ram 2500 Cummins

    Hi, so i have a 2016 Ram 2500 Cummins that needs an Air Diverter Valve replacement. I have the part coming and wanted to do the install by myself if possible but wasn't sure if its a big job and really involved or something I can handle with your typical home mechanics tools. I couldn't find any...
    • mtman24
    • Thread
    • 2016 cummins diesel diy ram 2500 replacement
    • Replies: 0
    • Forum: Heavy Duty
  10. D

    Truck Bed Replacement

    Hi, I have a 2003 Dodge Ram 1500 with a 6 ft long bed (I measured it and it's about 80 inches long by 6 ft wide, end to end but my guess is that it is considered 6 ft long bed ?). I'd like to replace the bed bc mine is very rusted, with holes, etc. How do I know what truck years are compatible...
  11. B

    broken antenna and aftermarket replacement

    Good morning, A week ago I went through one of the automatic car washes in town, only because it was too cold for me to wash by hand, and then my antenna broke off. It broke at the brass fitting where the antenna base screws in. I have priced out how much it would cost to buy the parts for...
  12. JellyBeanFTW

    New dash replacement - OEM part numbers

    Hey all! I am currently waiting on parts for a heater core job on my '02 1500. Since I've got the dash completely out, I've decided to replace anything that's broken with OEM. It's expensive. But a little peace of mind and comfort for me go a long way (don't judge;)). Anyway, the original...
    • JellyBeanFTW
    • Thread
    • 1500 2002 breaking cracks dash nos oem ram replacement
    • Replies: 2
    • Forum: Interior
  13. JellyBeanFTW

    OEM Screws for door speakers

    Hey guys! I've been doing some work on the truck recently (heater core). And while I've got the majority of the trim pulled out and waiting for parts, I figured I'd go the extra mile and run new speaker wire from all doors to the front firewall. Once I popped off the inner door panels, I...
  14. XXSNOTRODXX

    16 steering wheel

    Selling steering wheel out of 16 ram with 33k miles on it. $50 plus shipping. PayPal . Thanks
    • XXSNOTRODXX
    • Thread
    • replacement steering steering wheel swap upgrade wheel
    • Replies: 4
    • Forum: For Sale
  15. NickyLenz

    WHERE DO I FIND REPLACEMENT LIFTED PARTS???

    I've been losing my MIND trying to find replacement Front sway bar end links for my 2011 Ram 1500 4x4 with a 4" rough country lift, and even though i'm trying my hardest to replace parts as they go with ANYTHING BUT RC, i cant even find just the end links even through rough country. Can someone...
    • NickyLenz
    • Thread
    • 4" lift help needed lifted lifted ram parts replacement sway bar links
    • Replies: 3
    • Forum: Lifted
  16. TheBlackSheep

    Headlight Vent Filter Caps

    I purchased a set of black out quad headlights, and they're missing one of the vent/filter/cap things. I am having zero luck finding a replacement part number for the rubber assembly and the plastic cap. Can anyone help me out? I'd like to order a replacement, and a few extras if they're cheap...
  17. UnicornBeastOwner

    Exhaust 250p 1998 10 magnum

    Looking for information or pictures on the dodge ram 98 magnums exhaust system. My cats are clogged and cant find diagrams or hangers that match the ones under mine. It goes from two pipes to one big log type pipe and smaller out the back. I have to remove mine and the hangers are all rusted and...
  18. B

    Gauge cluster questions

    I have an 05 4.7 and the speedo, oil pressure, and temp gauges are all not working properly. Picked up a replacement from a salvage but the connections are different. Any recommendations on a place to find a stock one or aftermarket that will work and won't cost more than $300. Thank you for...
    • Bleev316
    • Thread
    • gauges replacement speedometer
    • Replies: 2
    • Forum: Interior
  19. Motor Head

    How-To Replace Dash Speakers w/VID

    As mentioned in title, I show you how to replace your front dash speakers of your 4th gen. Very easy install, and in my opinion well worth the small cost. Stock speakers are garbage, now I’m getting crisp treble from the dash speakers. Minimal tools required as well.
    • Motor Head
    • Thread
    • 3.55 dash speakers infinity install kicker polk replace replacement upgrade
    • Replies: 4
    • Forum: 4th Gen DIY
  20. Motor Head

    How-To Replace BOTH 6.7L Fuel Filters w/VID

    Yesterday I tackled replacing both fuel filters on my 6.7L. It was a breeze! Figured I would make a how-to vid of my experience to help others and help realize how expensive the service could be at your local dealership or shop. I even called a local dealership for a price quote in my vid. There...
    • Motor Head
    • Thread
    • 6.7l change cummins fuel filter fuel filters how-to oem oem filter replace replacement
    • Replies: 10
    • Forum: 4th Gen DIY
  21. G

    Alternator Bearing Sizes?

    Hey all! My water pump went and took out the bearing on my alternator at the sasme time... So figured insted of just buying a new alternator I'd try replacing the bearings and maybe the brushes while im in there. Problem is I cant find an answer on what sizes to order. Lots of info for 3rd...
    • Gregnor
    • Thread
    • alternator bearings diy electrical issues help help with replace replacement
    • Replies: 5
    • Forum: Tech Info
  22. Boosted Motorsports

    How to install a third brake light CANBUS 921 bulb for dirt cheap!

    Found another set of CHEAP CANBUS compatible 921 bulbs. Heres how to install them and shows the bulbs I used. Only $9.99 for two and you only need one for the 3rd brake. No error or bulb out messages either!

Latest posts

Members online

Total: 657 (members: 18, guests: 639)
Robots: 1,623

Forum statistics

Threads
195,622
Posts
2,872,657
Members
156,453
Latest member
Jems007

Share this page

Top