Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Have you checked your wiring? Start at the connector and look for any breaks or rubs that could be causing a ground.
I do have to ask how you arrived at the decision to replace your throttle. A symptom of P0352 does not include that.
I do have to ask how you arrived at the decision to replace your throttle. A symptom of P0352 does not include that.
DTC P0352 Ignition Coil B Primary/Secondary Circuit Malfunction
Detailed information on troubleshooting and repairing a P0352 DTC code which refers to a circuit malfunction in the ignition coil B. Also includes links to relevant forum topics on the code.
www.obd-codes.com
Smoher
Junior Member
We changed throttle body cause we did get code for throttle body sensor. Also got a knock sensor code also charged it.
Have checked all the wires no sign of rub.
Also now learned if we disconnect the battery it runs excellent for a few days then goes right back to rough idle… black smoke and stalling out.
So we are leaning toward engine control module.
Have checked all the wires no sign of rub.
Also now learned if we disconnect the battery it runs excellent for a few days then goes right back to rough idle… black smoke and stalling out.
So we are leaning toward engine control module.
Black03HemiCammer
Junior Member
Any update to this matter? I know its been a minute since last post but im having similar issues
