2016 Ram

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MikeB1977

Junior Member
Joined
Jan 30, 2020
Posts
4
Reaction score
0
Location
Canada
Ram Year
2016
Engine
5.7
Hello folks new to the forum I currently have 2016 Ram with the Hemi has 50000 km on it was in for alignment a mth ago but seems know when going over small bumps can hear like little clunking sounds at low speed sounds like coming from front end somewhere front end seem tight any general idea what to look at thanks !!!!!
 

Brandon-w

Senior Member
Joined
Jan 2, 2019
Posts
3,647
Reaction score
6,104
Location
Yukon
Ram Year
2015 Ram 1500
Engine
6.4
Welcome To the forum. I'd start by checking sway bar bushings and links. That's usually what it is.
 
OP
OP
M

MikeB1977

Junior Member
Joined
Jan 30, 2020
Posts
4
Reaction score
0
Location
Canada
Ram Year
2016
Engine
5.7
Ok thanks how do you tell if there bad do you half to remove them to see thanks for the reply
 

Brandon-w

Senior Member
Joined
Jan 2, 2019
Posts
3,647
Reaction score
6,104
Location
Yukon
Ram Year
2015 Ram 1500
Engine
6.4
Crawl under the front end grab the bar in the middle if there's any movement you need new bushings. Then go to driver and passenger side and push up and down on the end of the bar of anything moves there it's likely sway bar links.
 

tidefan1967

Senior Member
Joined
Feb 3, 2018
Posts
3,012
Reaction score
5,098
Location
Summerville, South Carolina
If that doesn't work screw out your hood bumpers a turn or two. I had a similar front end clunk that I would have sworn on a stack of bibles was coming from somewhere under the front but it was the hood. Only happened at low speeds going over small bumps and turning into my drive way mostly. Let us know what you find out.
 
Back
Top