r84boomer
Junior Member
- Joined
- Sep 21, 2017
- Posts
- 16
- Reaction score
- 18
- Ram Year
- 2017
- Engine
- Laramie 4X4
Did you try setting LED Parking Lamp Present to "yes" ?
that’s how I had it set but still had error code
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Did you try setting LED Parking Lamp Present to "yes" ?
yes hid is set to yes
Do you think it will take a few key cycles or should it be immediately?
G2 with Hikari ultras both how and lo beam. Morimoto replacement vertical led fogs. Did the door set up to rod turn signal error but this parking light error just won’t go away
With led low/high beam set to no, did you get a error message on those? Or only the parking lights
Just to verify.
VehConfig 3 HID lamps > YES
CBC FEATURES-LED Front Turn Lamps > YES
CBC FEATURES-LED Front Park/Turn > No
CBC FEATURES-LED Low Beams > No
CBC FEATURES-LED High Beams > No
CBC Extern.Light Right/Left Low Beam > 12.2v
CBC Extern.Light Right/Left Front Corner > 12.2v
2018 Ram 2500 6.4L Hemi Tradesman
so here is something i found on my win10 laptop.. try using the software that came with, or downloadable for the MX+ Mine would connect even though it didn't show as a connected device.. it was a bit strange for me to grab onto. Make sure its a connected device, not necessarily "connected" but is listed in your devices. then open up the software, it should work, it did for me.
I tried installing HIDs in my fogs today. They blinked 3 times then quit. I have them on 35 watt ballasts with no relay.
In Alfa I turned the LED Fogs on
Any help would be appreciated
What hid's are you using
2018 Ram 2500 6.4L Hemi Tradesman
HID Warehouse bulbs
https://www.amazon.com/HID-Warehouse-HID-Xenon-Replacement-Bulbs/dp/B010W2N70A
Innovited 35watt ballasts
https://www.amazon.com/Innovited-Replacement-Slim-Ballast-Sizes/dp/B00BKNBDR0
HID Warehouse bulbs
https://www.amazon.com/HID-Warehouse-HID-Xenon-Replacement-Bulbs/dp/B010W2N70A
Innovited 35watt ballasts
https://www.amazon.com/Innovited-Replacement-Slim-Ballast-Sizes/dp/B00BKNBDR0
Those look like a knockoff version of the ones I have (is that a plastic ballast case?)Those ballast look different than what comes with the Innovited hid kit. But still should work. I couldn't find any other settings that relate to fogs. I was hoping to see a voltage adjustment.
2018 Ram 2500 6.4L Hemi Tradesman
It's a metal case. Thought I was buying something good. At this point I'm ready to return the bulbs and ballasts. Start over. What is recommended to work that is less than $100 a set?Those look like a knockoff version of the ones I have (is that a plastic ballast case?)
I’m guessing the startup current is unstable and too great for the fog lamp circuits, and the bcm is shutting them down to protect itself.
The Innovited packaged set has worked well for me...It's a metal case. Thought I was buying something good. At this point I'm ready to return the bulbs and ballasts. Start over. What is recommended to work that is less than $100 a set?
What setup do you have?Those look like a knockoff version of the ones I have (is that a plastic ballast case?)
I’m guessing the startup current is unstable and too great for the fog lamp circuits, and the bcm is shutting them down to protect itself.
What setup are you running?Those ballast look different than what comes with the Innovited hid kit. But still should work. I couldn't find any other settings that relate to fogs. I was hoping to see a voltage adjustment.
2018 Ram 2500 6.4L Hemi Tradesman
I’m using the same kit @SitKneelBend posted for my low beams. I see the difference now. Yours are DC ballasts, and ours are AC digital ballasts. The DC ballasts are just to unstable on startup, and the current probably spikes too high.What setup do you have?